期刊文献+

基于复合材料层合箱梁改进解析模型计算等效刚度 被引量:2

Equivalent stiffness calculation based on refined analytical model of composite laminated box beam
原文传递
导出
摘要 提出了基于复合材料层合箱梁改进解析模型的等效刚度计算方法。在考虑三维应变效应的同时用复合材料单层的二维折算模量分量来表示三维折算模量分量,简化了复合材料层合箱梁等效刚度系数的计算,得到了由梁横截面几何尺寸和层合板刚度系数表达的等效抗弯刚度和等效抗扭刚度的解析式。该解析式适用于环向刚度一致的复合材料层合箱梁,并充分考虑了弯曲-剪切耦合和扭转-拉伸耦合效应对等效刚度的影响。通过三点弯试验和扭转试验,验证了解析式的正确性;通过与分层等效叠加法、有限元法进行对比,分析了解析式的计算精度。结合经典层合板理论,研究了铺层方式对等效刚度产生的影响及原因,预测了不同铺层复合材料层合箱梁等效刚度的变化规律。 An equivalent stiffness calculation method based on refined analytical model of composite laminated box beam was proposed.Considering the three-dimensional strain effect,the two-dimensional reduced modulus component of the composite single layer was used to represent the three-dimensional reduced modulus component,which simplified the calculation of the equivalent stiffness coefficient of the composite laminated box beam,and the analytic formulas of equivalent bending stiffness and equivalent torsional stiffness characterized by the cross-section geometry of the beam and the stiffness coefficient of the laminate were obtained.The analytical formulas are suitable for composite laminated box beam with circumferentially uniform stiffness,and fully consider the effects of bending-shear coupling and torsion-tensile coupling on equivalent stiffness.Through the three-point bending test and the torsion test,the correctness of the analytical formula is verified.By comparing with the layered equivalent superposition method and the finite element method,the analytical precision of the analytical formula is analyzed.Combined with the classical laminated plate theory,the influence of the lamination method on the equivalent stiffness and its causes were studied,and the variation law of the equivalent stiffness of the laminated composite beams with different lay-ups was predicted.
作者 朱秀杰 熊超 殷军辉 尹德军 邓辉咏 李宝晨 ZHU Xiujie;XIONG Chao;YIN Junhui;YIN Dejun;DENG Huiyong;LI Baochen(Department of Artillery Engineering,Shijiazhuang Campus,Army Engineering University,Shijiazhuang 050003,China)
出处 《复合材料学报》 EI CAS CSCD 北大核心 2020年第6期1483-1495,共13页 Acta Materiae Compositae Sinica
基金 省部级重点攻关项目(ZS2015070132A12002)。
关键词 复合材料层合箱梁 剪切变形梁理论 等效抗弯刚度 等效抗扭刚度 层合板刚度系数 composite laminated box beam shear-deformable beam theory equivalent bending stiffness equivalent torsional stiffness laminate stiffness coefficient
  • 相关文献

参考文献3

二级参考文献22

  • 1孙华东,林玉祥.复合材料迭层板等效模量的计算分析[J].太原机械学院学报,1993,14(2):113-119. 被引量:3
  • 2ZHANG D D,HUANG Y X,ZHAO Q L,et al.Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system[J].Composite Structures,2014,108: 600-615. 被引量:1
  • 3LI F,ZHAO Q L,CHEN L,et al.Experimental and theoretical research on the compression performance of CFRP sheet confined GFRP short pipe[J].The Scientific World Journal,2014,2014: 1-12. 被引量:1
  • 4JEGLEY D C,WU K C,PHELPS J E,et al.Structural efficiency of composite struts for aerospace applications[J].Journal of Spacecraft and Rockets,2012,49(5): 915-924. 被引量:1
  • 5SCHVTZE R.Lightweight carbon fibre rods and truss structures[J].Materials & Design,1997,18(4-6): 231-238. 被引量:1
  • 6钱鹏,叶列平,翁冠群.CFRP杆轴心受力失效模式与变形性能研究[C]//第三届全国FRP学术交流会议论文集.北京: 中国土木工程学会,2004: 349-355. 被引量:1
  • 7WILD P M,VICKERS G W.Analysis of filament-wound cylinderical shells under combined centrifugal pressure and axial loading[J].Composites Part A: Applied Science & Manufacturing,1997,28(1): 47-55. 被引量:1
  • 8JOLICOEUR C,CARDOU A.Analytical solution for bending of coaxial orthotropic cylinders[J].Engineering Mechanics,1994,120(12): 2556-2574. 被引量:1
  • 9CHOUCHAOUI C S,OCHOA O.Similitude study for a laminated cylindrical tube under tensile,torsion,bending,internal and external pressure.Part I: Governing equations[J].Composite Structures,1999,44(4): 221-229. 被引量:1
  • 10LEKHNITSKII S G.Theory of elasticity of an anisotropic body[M].Moscow: MIR Publishers,1981: 215-256. 被引量:1

共引文献8

同被引文献12

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部