摘要
The cellulosic bast fibers are recognized as a justifiable and biodegradable substitute for producing moderate strength polymer composite materials because of their characteristics of renewability,ecofriendliness,and higher specific strength.Hence the aim of this research work is to fabricate Himalayan bast fibers(Nettle fiber(NF)/bauhinia vahlii fiber(BF)) based mono/hybrid epoxy composites at varying weight percentage of 2-6 wt% and evaluate the physical(void fraction and water absorption),mechanical(tensile strength,flexural strength,hardness) and sliding wear properties of as-fabricated composites.The 6 wt% NBF reinforced composites exhibited higher mechanical properties as compared to NF and BF composites with tensile strength of 34.04 MPa,flexural strength of 42.45 MPa,and hardness of 37.01 Hv respectively.The influence of various control factors(sliding velocity,NF/BF/NBF contents,normal load and sliding distance) on specific sliding wear rate of composites was evaluated by Taguchi(three factors at three levels) experimental design and the percentage contribution of these selected parameters on sliding wear performance was examined by Analysis of variance(ANOVA).The sliding wear property of as-developed composites was found to be greatly influenced by sliding velocity and the wear resistance was observed to be improved with the NF/BF/NBF contents.The wear mechanism of the as-fabricated composites has been elucidated by scanning electron microscopy analysis.The research outcomes demonstrated that the hybridization of Bauhinia vahlii fiber with Nettle fiber led to improve the mechanical and wear properties of epoxy composites.
