摘要
采用等离子喷涂工艺在A356铝合金表面制备Ni涂层,并使用消失模铸造固-液复合Al/Mg双金属,通过扫描电镜、能谱仪等手段,研究不同浇注温度和Ni涂层对消失模铸造Al/Mg双金属组织的影响。结果表明,在相同工艺条件下,含Ni涂层的Al/Mg双金属界面厚度比不含Ni涂层的显著变薄,界面相组成也发生改变。浇注温度对含Ni涂层Al/Mg双金属的界面组织与成分也有影响,界面层厚度随浇注温度升高而增加,当浇注温度为730℃时能够获得较优良的界面组织。
The lost foam casting(LFC) process was used to prepare the solid-liquid compound of Al/Mg bimetal with a Ni coating on the surface of A536 aluminium alloy prepared by plasma spraying technology, and the effects of pouring temperature and Ni coating on interfacial microstructure of Al/Mg bimetal were investigated with the help of scanning electron microscopy and energy dispersive spectrometer. The results reveal that the interface layer thickness of the Al/Mg bimetal with Ni coating is less than that of one without a Ni coating under the same conditions, and the compositions of the interface layer of the Al/Mg bimetal with Ni coating are also different from that of one without Ni coating. The pouring temperature also has a prominent influence on the interfacial microstructure and compositions of the Al/Mg bimetal with Ni coating. The thickness of interface layer is increased with the increase of the pouring temperature, and a acceptable interfacial microstructure can be obtained at 730 ℃.
作者
张政
蒋文明
李广宇
管峰
朱俊文
于洋
樊自田
Zhang Zheng;Jiang Wenming;Li Guangyu;Guan Feng;Zhu Junwen;Yu Yang;Fan Zitian(State Key Laboratory of Material Processing and Die&Mould Technology,Huazhong University of Science and Technology)
出处
《特种铸造及有色合金》
CAS
北大核心
2020年第5期539-543,共5页
Special Casting & Nonferrous Alloys
基金
国家自然科学基金资助项目(51775204,51204124)
高性能复杂制造国家重点实验室开放课题研究基金资助项目(Kfkt2019-01)
国家磁约束核聚变能发展研究专项基金资助项目(2018YFE0313300)。
关键词
浇注温度
Ni涂层
消失模铸造
Al/Mg双金属
界面组织
Pouring Temperature
Ni Interlayer
Lost Foam Casting
Al/Mg Bimetal
Interfacial Microstructure
