摘要
Marciniack–Kuczinski(M–K)model is widely used to predict material's forming limit curve(FLC).The prediction of FLC traditionally neglected through-thickness normal stress.However,it cannot be neglected in some forming processes.Much work has been done to study the effect of through-thickness normal stress on FLC with constant through-thickness normal stress or constant ratio of through-thickness normal stress and maximum principal stress.In addition,based on Nakazima test process,the ratio of through-thickness normal stress and maximum principal stress has been derived,which was a function of instantaneous thickness and loading path.Here,initial groove angle in M–K model was not considered.In this paper,uniaxial tension tests and Nakazima tests were performed on 7B04 aluminum alloy.Based on Hill 48 yield criterion and M–K model,the prediction model of FLC was established.The increase of thickness can enhance FLC.Meanwhile,it is necessary to consider through-thickness normal stress and initial groove angle in prediction model.On the left side of FLC,the effect of initial groove angle on FLC is weakened by increasing sheet thickness.On the right side of FLC,the effect of initial groove angle on FLC is strengthened by increasing sheet thickness.On the right side of FLC,the relation between limit strain points with different thicknesses is linear under one certain loading path.Thickness has decisive effect on through-thickness normal stress level and the changing trendy of through-thickness normal stress during calculation is different under different stress condition.
基金
the support from the National Natural Science Foundation of China(51575028)
the Fundamental Research Funds for the Central Universities(YWF-18-BJ-J-75)。
