期刊文献+

Numerical Study of the Air Bleeding Caused Non-Uniformity in Axial Compressor 被引量:2

Numerical Study of the Air Bleeding Caused Non-Uniformity in Axial Compressor
原文传递
导出
摘要 Bleeding in the compressor is getting more and more attractive because the increasing demand of bleeding rate as the temperature of the first stage of turbine gets higher and needs more cooling air.Though plenty of work has been done about bleeding,however,most of the work is studied with a single passage or ignoring the real structure of the bleeding system.In the present study,multi-passage calculation was used through ANSYS CFX to consider the finite duct holes in the whole blade row,and the effect of the axial location of bleeding slot on the non-uniformity of the blade passage was investigated,and the non-uniform could maintain a low level when bleeding at the front part of the blade passage and the non-uniformity would become large when moving the bleeding slot much further downstream.Afterward,the air bleeding mass flow rate was studied.It’s found that the non-uniformity of air bleeding mass flow is small when bleeding at a low mass flow rate in each passage and results in relatively uniform flow field in the passage.However,the non-uniformity increases significantly as the bleeding mass flow rate increases.Some flow field details were also given to study how the flow field changes when bleeding non-uniformly. Bleeding in the compressor is getting more and more attractive because the increasing demand of bleeding rate as the temperature of the first stage of turbine gets higher and needs more cooling air. Though plenty of work has been done about bleeding, however, most of the work is studied with a single passage or ignoring the real structure of the bleeding system. In the present study, multi-passage calculation was used through ANSYS CFX to consider the finite duct holes in the whole blade row, and the effect of the axial location of bleeding slot on the non-uniformity of the blade passage was investigated, and the non-uniform could maintain a low level when bleeding at the front part of the blade passage and the non-uniformity would become large when moving the bleeding slot much further downstream. Afterward, the air bleeding mass flow rate was studied. It’s found that the non-uniformity of air bleeding mass flow is small when bleeding at a low mass flow rate in each passage and results in relatively uniform flow field in the passage. However, the non-uniformity increases significantly as the bleeding mass flow rate increases. Some flow field details were also given to study how the flow field changes when bleeding non-uniformly.
出处 《Journal of Thermal Science》 SCIE EI CAS CSCD 2020年第1期219-231,共13页 热科学学报(英文版)
基金 supported by the National Natural Science Foundation of China (Grant Nos. 51776048 and 51436002)
关键词 compressor bleeding multi-passage calculation NON-UNIFORMITY axial compressor compressor bleeding multi-passage calculation non-uniformity axial compressor
  • 相关文献

参考文献2

二级参考文献21

  • 1张皓光,楚武利,吴艳辉,张夏.轴向间隙引气对双级轴流式压气机性能及流场影响的数值研究[J].流体机械,2006,34(7):24-27. 被引量:17
  • 2赵斌,李绍斌,侯安平,等.发动机空气系统气源引气的研究和探讨[c]//航空学会第十五届叶轮机专业委员会学术交流会文集.张家界:中国航空学会动力专业分会,2009:190-198. 被引量:4
  • 3杨燕生,吴向宇,陆海鹰,等.航空发动机设计手册,第16分册:空气系统及传热分析[M].北京:航空工业出版社,2001:1-11. 被引量:2
  • 4Andrew J Y, Ronald J R. Effects of bleed air extraction on thrust level of the F404-GE400 turbofan engine [ R ]. NASA TM- 104247,1992. 被引量:1
  • 5Alison B E. The effects of compressor seventh-stage bleed air ex- traction on performance of the F100-PW-220 afterburning turbo- fan engine [ R]. NASA CR-179447,1991. 被引量:1
  • 6Wellborn S R, Michael L K. Bleed flow interactions with an axial- flow compressor powerstream [ R ]. AIAA Paper 2002-4057,2002. 被引量:1
  • 7Leishman B A,Cumpsty N A, Denton J D. Effects of bleed rate and endwall location on the aerodynamic behavior of a circular hole bleed off-take[ J]. ASME Journal of Turbomachinery,2007, 129(4) :645 -658. 被引量:1
  • 8Leishman B A,Cumpsty N A,Denton J D. Effects of inlet ramp surfaces on the aerodynamic behavior of bleed hole and bleed slot off-take configurations [ J ]. ASME Journal of Turbomachinery, 2007,129(4) : 659 -668. 被引量:1
  • 9Leishman B A,Cumpsty N A. Mechanism of the interaction of a ramped bleed slot with the primary flow [ J ].ASME Journal of Turbomachinery,2007,129 (4) : 669 - 678. 被引量:1
  • 10Gummer V, Goller M, Swoboda M. Numerical investigation of end wall boundary layer removal on highly loaded axial compressor blade rows [ J ]. Journal of Turbomachinery, 2008, 130 ( 1 ) : 011015.1 -011015.9. 被引量:1

共引文献17

同被引文献6

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部