摘要
在机械传动轴用40Cr钢基体上制备了化学镀Ni-P合金镀层,并对化学镀Ni-P合金镀层的厚度、表面粗糙度、结构、表面形貌及耐蚀性进行了研究。结果表明:化学镀Ni-P合金镀层属于立方结构,结晶度较好;化学镀Ni-P合金镀层表面呈现出均匀、致密的颗粒状形貌,厚度约为6.5 pm;化学镀Ni-P合金镀层的自腐蚀电位为一0.305 V,自腐蚀电流密度为36.72 ptA/cm2,耐蚀性较好。
Electroless Ni-P alloy coating was prepared on the surface of 40Cr steel substrate for mechanical drive shaft,and the thickness,surface roughness,structure,surface morphology and corrosion resistance of electroless Ni-P alloy coating was investigated.The results showed that electroless Ni-P alloy coating belongs to cubic structure with good crystallinity.The surface of electroless Ni-P alloy coating exhibited uniform and dense granular morphology with a thickness of 6.5 ptm.Electroless Ni-P alloy coating possessed excellent corrosion resistance,its self corrosion potential was一0.305 V and self-corrosion current density was 36.72^A/cm2.
作者
崔以刚
CUI Yigang(College of Petroleum Equipment and Mechanical and Electrical Engineering,Dongying Vocational College,Dongying 257091,China)
出处
《电镀与环保》
CAS
CSCD
北大核心
2020年第1期31-32,33,共3页
Electroplating & Pollution Control
关键词
机械传动轴
化学镀Ni-P合金镀层
耐蚀性
mechanical drive shaft
electroless Ni-P alloy coating
corrosion resistance
