期刊文献+

磷酸锰铁锂复合三元体系及对复合方式的研究 被引量:3

Study on ternary system and method of compounding NCM of LMFP
下载PDF
导出
摘要 将LiMn0.75Fe0.25PO4与LiNi0.6Co0.2Mn0.2O2以常规搅拌方式制成复合正极,搭配常规人造石墨及陶瓷隔膜,所组装的电池表现出与三元电池相似的电压平台和能量密度,更优的低温性能(-20℃低温放电容量相当于常温容量的74.5%)以及更长的循环寿命(常温循环寿命为3 672次@86.7%),并且能够通过针刺安全测试。而先将LiMn0.75Fe0.25PO4包覆在LiNi0.6Co0.2Mn0.2O2上,再正常合浆的正极,对比常规搅拌方式得到的正极在针刺安全性方面略有优势。 The battery was assembled by composite cathode made fromLiMn0.75Fe0.25 PO4 and LiNi0.6Co0.2Mn0.2 O2 by conventional stirring method, conventional artificial graphite and ceramic separator. Compared with the battery using NCM, the assembled battery shows a similar voltage platform and energy density, better low temperature performance(discharge capacity at-20 ℃ is 74.5% of that at room temperature) and longer cycle life(RT cycle life is 3 672 cycles at 86.7%). Furthermore, it can pass the safety test of nail. Meanwhile, the compositing cathode made by coating LiMn0.75Fe0.25 PO4 on LiNi0.6Co0.2Mn0.2 O2 firstly and then normal compounding slurry has the advantage of safety of nail compared with that made by conventional method.
作者 贺志龙 田爽 刘兆平 杜强 蒋亚北 HE Zhi-long;TIAN Shuang;LIU Zhao-ping;DU Qiang;JIANG Ya-bei(Advanced Li-ion Battery Engineering Lab,Ningbo Institute of Materials Technology&Engineering,CAS,Ningbo Zhejiang 315201,China;University of Chinese Academy of Sciences,Beijing 100049,China)
出处 《电源技术》 CAS 北大核心 2019年第11期1745-1748,共4页 Chinese Journal of Power Sources
基金 中国科学院关键技术人才项目(Y70602WR02)
关键词 磷酸锰铁锂 NCM 复合方式 三维导电网络 安全 LMFP NCM compound method 3-D conductive network safety
  • 相关文献

参考文献3

二级参考文献58

  • 1JEONG E D, WON M S, SHIM Y B.Cathodic properties of a lithium-ion secondary battery using LiCoO2 prepared by a complex formation reaetion[J].Joumal of Power Sources, 1998, 70(1): 70-77. 被引量:1
  • 2PADHI A K, NANJUNDASWAMY K S, GOODENOUGH J B. Phospho-olivines as positive-electrode materials for reehargeable lithium batteries [J].Journal of the Electrochemical Society, 1997, 144(4): 1188-1194. 被引量:1
  • 3GARCIA-MORENO O, ALVAREZ-VEGA M, GARCIA-ALVARA- DO F, et al. Influence of the structure on the electrochemical perfor- mance of lithium transition metal phosphates as cathodic materials in reehargeable lithium batteries: A new high-pressure form of LiM- PO4 (M = Fe and Hi) [J].Chemistty of materials, 2001,13 (5): 1570-1576. 被引量:1
  • 4YAMADA A, HOSOYA M, CHUNG S C, et al. Olivine-type cath- odes: Achievements and problems [J].Joumal of Power Sources, 2003, 119-121(1): 232-238. 被引量:1
  • 5DELACOURT C, POIZOT P, MORCRETTE M, et al. One step low-temperature route for the preparation of electrochemically ac- tive LiMnPO4 powder[J]. Chem Mater, 2004, 16(1): 93-99. 被引量:1
  • 6BRAMNIK N N, EHRENBERG H. Precursor-based synthesis and electrochemical performance of LiMnPO4[J].Joumal of Alloys and compounds, 2008, 464(1/2): 259-264. 被引量:1
  • 7FANG H S, PAN Z Y, LI L P, et al. The possibility of manganese disorder in Li]VInPO4 and its effect on the electrochemical activity[J]. Eleerochemisay Communications, 2008, 10(7): 1071-1073. 被引量:1
  • 8KIMA T R, KIMA D H, RYUA H W, et al. Synthesis of lithium manganese phosphate nanoparticle and its properties [J].Journal of Physics and Chemistry of Solids, 2007, 68(5/6): 1203-1206. 被引量:1
  • 9DOI T, YATOMI S, KIDA T, et al. Liquid-phase synthesis of uni- formly nanosized LiMnPO4 particles and their electrochemical pro- perties for lithium-ion batteries[J].Crystal Growth & Design, 2009, 9 (12): 4990-4992. 被引量:1
  • 10CHOI D W,WANG D H, BAE I T, et al.LiMnPO4 nanoplate grown via solid-state reaction in molten hydrocarbon for Li-ion battery cathode[J].Nano Letters, 2010, 10(8): 2799-2805. 被引量:1

共引文献16

同被引文献8

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部