摘要
In this study, the ZrB2/Al nanocomposites were fabricated via in-situ reaction of the Al-K2ZrF6-KBF4 system, assisted with ultrasonic vibration and spiral electromagnetic stirring. Microstructure, tensile property and creep behavior of the fabricated nanocomposites were further investigated. Microstructure observation showed that the ultrasonic vibration could prevent the fast growth as well as break the clusters of in-situ synthesized nanoparticles in melt, resulted in smaller size (10-50 nm) and relatively more uniform distribution of the in-situ nanoparticles located on the boundary of and/or inside the aluminum matrix grains in the final composites. The fabricated nanocomposites exhibited an enhancement in both strength and ductility, due to the elevated work hardening ability, i.e., improved dislocation propagating ability and decreased dynamic recovery of the existing dislocations induced by the in-situ nanoparticles. Meanwhile, the nanocomposites exhibited excellent creep resistance ability, which was about 2-18 times higher than those of the corresponding aluminum matrix. The stress exponent of 5 was identified for the fabricated nanocomposites, which suggested that their creep behavior was related to dislocation climb mechanism. The enhanced creep resistance of the nanocomposites was attributed to the Orowan strengthening and grain boundary strengthening induced by the ZrB2 nanoparticles. Thus, the ultrasonicchemical in-situ reaction promises a low cost but effective way to fabricate aluminum nanocomposites with high strength and high creep resistance.
In this study, the ZrB2/Al nanocomposites were fabricated via in-situ reaction of the Al-K2ZrF6-KBF4 system, assisted with ultrasonic vibration and spiral electromagnetic stirring. Microstructure, tensile property and creep behavior of the fabricated nanocomposites were further investigated. Microstructure observation showed that the ultrasonic vibration could prevent the fast growth as well as break the clusters of in-situ synthesized nanoparticles in melt, resulted in smaller size（10–50 nm） and relatively more uniform distribution of the in-situ nanoparticles located on the boundary of and/or inside the aluminum matrix grains in the final composites. The fabricated nanocomposites exhibited an enhancement in both strength and ductility, due to the elevated work hardening ability, i.e., improved dislocation propagating ability and decreased dynamic recovery of the existing dislocations induced by the in-situ nanoparticles. Meanwhile, the nanocomposites exhibited excellent creep resistance ability, which was about 2–18 times higher than those of the corresponding aluminum matrix. The stress exponent of 5 was identified for the fabricated nanocomposites, which suggested that their creep behavior was related to dislocation climb mechanism. The enhanced creep resistance of the nanocomposites was attributed to the Orowan strengthening and grain boundary strengthening induced by the ZrB2 nanoparticles. Thus, the ultrasonicchemical in-situ reaction promises a low cost but effective way to fabricate aluminum nanocomposites with high strength and high creep resistance.
基金
financially supported by the Natural Science Foundation of China (Nos. U1664254, 51701085, 51801074)
the Natural Science Foundation for Young of Jiangsu Province, China (Nos. BK20160516 and BK201705433)
the Six Talents Peak Project of Jiangsu Province (No. 2018-XCL-202)
the Jiangsu Province Key Laboratory of High-end Structural Materials (No. HSM1803)
the Research Foundation for Advanced Talents of Jiangsu University, China (No. 14JDG125)
the Postdoctoral Science Foundation of Jiangsu Province, China (No. 1501029B)
the Postdoctoral Science Foundation of China (No. 2016M591780)
