摘要
以RV160E(Rotate Vector)为研究对象,对RV-E减速器的装配序列进行研究。通过对RV160E子装配体和聚族零件进行划分,建立了装配模型图、装配关联图及装配关联矩阵。应用割集理论对RV160E的装配序列进行研究,通过引入约束条件,得出8条理论可行装配序列。然后,通过SolidWorks进行装配序列仿真和干涉检查,将可行装配序列范围缩减到4条。最后,完成RV160E的整机装配,并对其进行了效率和回差测试,验证了所得4条装配序列的可行性。
Taking RV160E reducer as the research object,the assembly sequence of RV-E is studied. The RV160E sub-assembly and the poly-part parts are divided,and the assembly model diagram,assembly association diagram and assembly association matrix are established.The assembly sequence of RV160E is studied by using the cut set theory.By introducing constraints condition,eight theoretically feasible assembly sequences are obtained.Then,the assembly sequence simulation and interference checking are performed by SolidWorks,the range of possible assembly sequences is reduced to four.Finally,the RV160E whole machine is assembled and tested for efficiency and backlash.The feasibility of the four assembly sequences is verified.
作者
赵海鸣
蔡进雄
付彪
赵波
Zhao Haiming;Cai Jinxiong;Fu Biao;Zhao Bo(College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China;State Key Laboratory of High Performance Complex Manufacturing,Central South University,Changsha 410083,China)
出处
《机械传动》
北大核心
2019年第9期1-8,共8页
Journal of Mechanical Transmission
基金
国家高技术研究发展计划(863计划)(2014AA041602)
湖南省重点研发计划项目(2016GK2004)
关键词
RV减速器
装配序列
分层装配
关联图
RV reducer
Assembly sequence
Layered assembly
Association diagram
