期刊文献+

发动机冷却风扇叶尖参数优化 被引量:2

Optimization of Engine Cooling Fan Tip Parameters
下载PDF
导出
摘要 发动机冷却风扇是车辆冷却系统的重要组成部分,静压和轴功率是评价其气动性能的重要指标,而叶尖作为风扇做功的主要部分对风扇气动性能有较大影响.以发动机冷却风扇为研究对象,研究了风扇气动性能的计算方法和叶尖参数的优化方法.首先给出了风扇气动性能的计算方法,依据试验台建立风扇计算模型,利用模型仿真得到风扇在某一转速下的性能曲线,并与试验值进行了对比验证;然后以叶尖安装角、叶尖弦长、叶尖拱高为变量设计新风扇,基于正交试验法对各叶尖参数进行优化组合,给出了风扇叶尖参数的优化方法;最后通过风扇性能曲线、叶片压力图、叶片速度矢量图对优化结果进行分析,验证了优化方法的可行性.文中关于风扇叶尖参数的分析与优化方法,对发动机冷却风扇的设计具有指导意义. The engine cooling fan is an important part of the vehicle cooling system.Static pressure and shaft power are important indicators to evaluate its aerodynamic performance,and the tip of the blade as a main part of the fan work has a great influence on the aerodynamic performance of the fan.Taking the cooling fan of the engine as the research object,the calculation method of aerodynamic performance of the fan and the optimization method of blade tip parameters were studied.Firstly,the calculation method of fan aerodynamic performance was given,and the fan calculation model was established according to the test bench.Then a new fan was designed with the tip mounting angle,the tip length and the tip arch height as the variables.Based on the orthogonal test method,the parameters of the blade tip parameters were optimized and combined,and the optimization method of the fan tip parameters was given.Finally,the optimization results were further analyzed from fan performance curve,blade pressure diagram and blade velocity vector diagram,and the feasibility of the optimization method was verified.This analysis and optimization method of fan tip parameters is of guiding significance for the design of engine cooling fan.
作者 万里翔 段丽娜 郭覃 段耀龙 虞宁 上官文斌 WAN Lixiang;DUAN Lina;GUO Qin;DUAN Yaolong;YU Ning;SHANGGUAN Wenbin(School of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,Sichaun,China;Ningbo Xuelong Group Co.,Ltd.,Ningbo 315822,Zhejiang,China;School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China)
出处 《华南理工大学学报(自然科学版)》 EI CAS CSCD 北大核心 2019年第7期128-135,共8页 Journal of South China University of Technology(Natural Science Edition)
基金 国家自然科学基金资助项目(11472107)~~
关键词 发动机冷却风扇 叶尖参数 风扇气动性能 静压 轴功率 engine cooling fan tip parameters fan aerodynamic performance static pressure shaft power
  • 相关文献

参考文献10

二级参考文献25

  • 1Inoue M., Kuroumaru M., and Furukawa M.: Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor, Trans. ASME, Journal of Engineering for Gas Turbines and Power, Vol. 108, pp.7-14, (1986). 被引量:1
  • 2Lakshminarayana B., Zaccaria M., and Marathe B.: The Structure of Tip Clearance How in Axial Flow Compressors, Trans. ASME, Journal of Turbomachinery, Vol. 117, pp.336-347, (1995). 被引量:1
  • 3Furukawa M., Inoue M., Saiki K., Yamada M.: The Role of Tip Leakage Vortex Breakdown in Compressor Rotor Aerodynamics, Trans. ASME Journal of Turbomachinery, Vol. 121, pp.469--480, (1999). 被引量:1
  • 4Fukano T, Fukuhara M., Kawagoe K., Hara Y. and Kinoshita K.: Experimental Study on the Noise Reduction of a Propeller Fan (lst Report, Aerodynamic Characteristics), Trans. JSME, 56-531, B, pp.3378-3382, (1990) (in Japanese). 被引量:1
  • 5Coggiola E.CFD Based Design for Automotive Engine Cooling Fan Systems[C].SAE Paper 980427. 被引量:1
  • 6Moreau S,Bennett E.Improvement of Fan Design Using CFD[C].SAE Paper 970934. 被引量:1
  • 7Oh K J,Kang S H.A Numerical Investigation of Dual Performance Characteristics of a Small Propeller Fan Using Viscous Flow Calculations[J].Computers & Fluids,1999,28:815 -823. 被引量:1
  • 8Oh K J,Kang S H.Effects of Backplate on the Performance of a Small Propeller Fan[J].Transactions of the KSME,1996,20(4):1491 -1500. 被引量:1
  • 9Estevadeordal J,Copenhaver W,Bloch G,et al.Flow Field in a Low-speed Axial Fan:a DPIV Investigation[J].Experimental Thermal and Fluid Science,2000,23:11-21. 被引量:1
  • 10Niazi S.Numerical Simulation of Rotating Stall and Surge Alleviation in Axial Compressors[D].Georgia Institute of Technology,2000. 被引量:1

共引文献60

同被引文献10

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部