摘要
钢包浇注末期出现漩涡卷渣现象会直接影响钢水质量,本文对某厂70 t钢包进行水模实验,探究初始液面高度、水口直径及偏心率对漩涡形成高度与临界高度的影响。结果表明,临界高度H与水口直径D满足H=1.83333×10-4D4-0.02733D3+1.32167D2-18.56667D+96临界高度H与偏心率x满足H=-36.61089e(-x/-2.2945)+95.42308。
The phenomenon of vortex formation at the end of ladle teeming directly affects the quality of molten steel. In this paper,water model study of 70 t steel ladle in a steel works was carried out to study the effects of initial liquid level height,nozzle diameter and its eccentricity position on the formation height and the critical height of the vortex. The results show that the critical height H and nozzle diameter D obey the empirical correlation as: H =1.833 33×10-4D4 -0.027 33D3 +1.321 67D2 -18.566 67D +96 and the critical height H and the nozzle position eccentricity x follow the empirical correlation as: H =-36.610 89e(-x/-2.294 5)+95.423 08.
作者
张瑞东
艾新港
李胜利
钟维明
曾红波
刘海啸
ZHANG Ruidong;AI Xingang;LI Shengli;ZHONG Weiming;ZENG Hongbo;LIU Haixiao(School of Materials and Metallurgy,University of Science and Technology Liaoning,Anshan 114051,China)
出处
《辽宁科技大学学报》
CAS
2019年第2期91-94,共4页
Journal of University of Science and Technology Liaoning
基金
十三五国家重点研发计划重大专项(2017YFB0304201)
辽宁省教育厅创新团队项目(LT2016003)
辽宁省自然科学基金(201602385)
辽宁科技大学大学生创新创业训练计划项目(201810146160)
关键词
钢包
浇注
漩涡
形成高度
临界高度
steel ladle
teeming
vortex
formation height
critical height
