期刊文献+

基于硬脂酸复合相变材料的被动热沉性能 被引量:6

Performance of a passive heat sink using stearic acid based composite as phase change material
下载PDF
导出
摘要 固液相变储能材料的被动热沉广泛应用于航空航天及军事装备领域。针对高热流密度电子芯片的被动温控问题,对比实验验证了单温度和双温度2种数值模拟方法对基于泡沫铜/硬脂酸复合相变材料被动热沉控温过程模拟的准确性。结合基于Maxwell-Garnett模型的EMT建立了石墨烯纳米片/硬脂酸复合相变材料物性,采用更为精确的双温度数值模拟方法分析了不同导热强化方式的控温效果,并研究了环境温度对热沉控温效果的影响。结果表明:高热流密度下的相变温控过程采用双温度数值模拟更为精确;当导热增强体的体积组分相同时,提高泡沫金属的孔密度对相变温控效果提升有限,而同时采用泡沫金属与石墨烯纳米片能更有效改善相变控温效果;环境温度的剧烈变化对温控时间和控温温度均能产生影响。 The phase change material based passive heat sink is widely applied in the fields of aerospace and military equipment. To address the thermal management of electronic chip with high heat flux,the single temperature energy equation and the two temperature energy equation were applied to simulate the thermal management performance of the copper foam/stearic acid based heat sink,and their accuracy were validated by the lab-scale experiment. By combining with the thermal properties of grapheme nanoplatelets/stearic acid composite phase change material established by EMT based on Maxwell-Garnett model,the influence of different composition of thermal conductivity enhancement on the thermal performance of the heat sink was investigated. And the effect of the ambient temperature was studied. The results show that the two temperature energy equations can simulate more accurately when the heat flux of the chip is higher. When the volume fraction of the thermal conductivity enhancer is fixed,increasing pore density of copper foam has few improvement on the thermal management performance,while copper foam with Gn P can effectively improve the thermal management performance of the heat sink. The serious change of ambient temperature can play an important role in the managed temperature and temperature control time.
作者 赵亮 邢玉明 刘鑫 罗叶刚 芮州峰 ZHAO Liang;XING Yuming;LIU Xin;LUO Yegang;RUI Zhoufeng(School of Aeronautic Science and Engineering, Beihang University, Beijing 100083 , China)
出处 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2019年第5期970-979,共10页 Journal of Beijing University of Aeronautics and Astronautics
基金 航空科学基金(20172851018)~~
关键词 被动热沉 硬脂酸 相变材料 泡沫铜 温控 双温度能量方程 passive heat sink stearic acid phase change material copper foam thermal management two temperature energy equation
  • 相关文献

参考文献2

二级参考文献16

  • 1唐致远,管道安,张娜,邓艳波.锂离子动力电池的安全性研究进展[J].化工进展,2005,24(10):1098-1102. 被引量:26
  • 2张涛,余建祖.泡沫铜作为填充材料的相变储热实验[J].北京航空航天大学学报,2007,33(9):1021-1024. 被引量:30
  • 3Calmidi V V,Mahajan R L. The effective thermal conduetivity of high porosity fibrous metal foams[J]. Journal of Heat Transfer, 1999,121(2):466-471. 被引量:1
  • 4Bhattacharaya A, Calmidi V V, Mahajan R L. Thermo physical properties of high porosity metal foams[J]. Inter national Journal of Heat and Mass Transfer, 2002,45 (5) 1017-1031. 被引量:1
  • 5Boomsma K, Poulikakos D. On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam[J]. International Journal of Heat and Mass Transfer,2001,44(4):827-836. 被引量:1
  • 6Saha S K, Dutta P. Heat transfer correlations for PCM- based heat sinks with plate fins[J]. Applied Thermal Engineering,2010,30(16) :2485 2491. 被引量:1
  • 7Nayak K C, Saha S K, Srinivasan K, et al. A numerical model for heat sinks with phase change materials and thermal conductivity enhancers [J]. International Journal of Mass and Heat Transfer,2006,49(11/12):1833-1844. 被引量:1
  • 8Lamberg P, Siren K. Analytical model for melting in a semi-infinte PCM storage with an internal fin[J]. Heat and Mass Transfer,2003,39(2) :167-176. 被引量:1
  • 9Lamberg P,Siren K. Approximate analytical model for solidification in a finite PCM storage with internal fins[J]. Applied Mathematical Modelling,2003,27(7) :491-513. 被引量:1
  • 10Gustafsson S E. Transient plane source techniques for thermal conductivity and thermal diffusivity of solid materials[J]. Review of Scientific Instruments, 1990, 62 ( 3 ) : 797 804. 被引量:1

共引文献21

同被引文献16

引证文献6

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部