摘要
针对异形曲面抛光效率和抛光精度要求的不断提高,提出采用自主研发的卧式磁性复合流体(Magnetic compound fluid,MCF)抛光轮对异形旋转体工件进行抛光试验。以H26 黄铜材料为样件,展开抛光试验,并对抛光前后样件的表面形貌、表面粗糙度及表面材料去除率进行研究。实验结果表明,该抛光工艺能够高效率地实现样件表面材料的去除,并可获得较好的表面质量。
Aiming at the improvement of polishing efficiency and polishing precision requirements of special-shaped surfaces,a new polishing tool named magnetic compound fluid (MCF) wheel is proposed to perform the polishing process on shaped rotating body.The polishing test is carried out with H26 brass material,and the surface morphology,surface roughness and surface material removal rate of the samples are studied after polishing.The experimental results show that this processing method can effectively remove the surface material of the sample and better surface quality can be obtained.
作者
任鹤
洪小兰
王鹏
姜晨
Ren He;Hong Xiaolan;Wang Peng;Jiang Chen(School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China)
出处
《农业装备与车辆工程》
2019年第5期5-8,共4页
Agricultural Equipment & Vehicle Engineering
基金
国家自然科学基金(51475310)
关键词
异形曲面
磁性复合流体
抛光
表面粗糙度
材料去除率
special-shaped surface
magnetic compound fluid
polishing
surface roughness
material removal rate
