摘要
研究了一种新型耐高温聚合物电解质膜的制备方法.以聚偏氟乙烯(PVDF)为增强材料,以甲基咪唑功能化聚芳醚酮(MeIm-PAEK)为基体材料,通过两者共混制备了具有较高电导率和良好尺寸稳定性的膜材料,并研究膜材料组分对膜材料性能的影响.1H NMR证实了咪唑基团的接枝成功.磷酸掺杂实验表明:甲基咪唑的功能化,使MeIm-PAEK膜具备较强的吸附磷酸能力;随着咪唑基团接枝度的增加,MeImPAEK膜的磷酸掺杂含量显著增加.通过与PVDF复合,显著地改善MeIm-PAEK膜在高温下、高浓度磷酸掺杂后的尺寸稳定性. 70MeIm-PAEK/PVDF复合膜经85%磷酸溶液掺杂后,膜材料的磷酸掺杂质量分数为226%,体积溶胀率为248%,180℃不加湿条件下的电导率为0. 141 S/cm,适合做高温聚合物电解质膜材料.
Novel polymer electrolyte membranes of thermostability with superior conductivity and improved dimensional stability have been proposed based on poly(vinylidene fluoride)(PVDF)blended with methylimidazolium poly(aryl ether ketone)(MeIm-PAEK).The relationship between the properties and chemical components of membranes has been investigated.1H NMR spectra have confirmed the successful reaction of the imidazole function.Acid doping measurement indicates that grafting imidazole groups into PAEK makes the PAEK absorb phosphoric acid and the acid doping content increase with the increase of imidazole groups’grafting degree.The dimensional stability of MeIm-PAEK membranes in the concentrated phosphoric acid solution under elevated temperatures can be improved by blending PVDF.The 70MeIm-PAEK/PVDF membrane achieves an acid doping content of 226%and volume swelling of 248%after being immersed in the 85%phosphoric acid solution.This acid doped membrane exhibits a conductivity as high as 0.141 S/cm at 180℃ without humidifying.
作者
杨景帅
王逸涵
展思帆
杨国浩
YANG Jing-shuai;WANG Yi-han;ZHAN Si-fan;YANG Guo-hao(School of Sciences,Northeastern University,Shenyang 110819,China)
出处
《东北大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2018年第12期1800-1804,共5页
Journal of Northeastern University(Natural Science)
基金
国家自然科学基金资助项目(51603031)
中央高校基本科研业务费专项资金资助项目(N160504006)
关键词
聚合物电解质膜
燃料电池
耐高温
电导率
尺寸稳定性
polymer electrolyte membrane
fuel cell
thermo stability
conductivity
dimensional stability
