期刊文献+

基于OPNET的混合关键性网络建模与仿真分析 被引量:1

OPNET-based Modeling and Simulation Analysis of Mixed-criticality Systems
下载PDF
导出
摘要 混合关键性网络是一种新型的通信架构,可以满足非实时性和实时性业务的需求。为分析其网络性能,提出在OPNET网络仿真环境中建模的方法。以开放式系统互联模型为基础,采用层次化建模,构建网络的节点模型和进程模型。该模型考虑了事件触发和时间触发消息的特点,通过设计调度算法和容错方式,实现了仿真实验的灵活配置和端到端延迟抖动等性能指标的验证。对仿真结果的性能分析表明,混合关键性网络能够保证实时业务的确定性以及兼容标准以太网的非实时业务。 A mixed-criticality system is a novel communication architecture that meets the requirements of all applications from non-real-time application to real-time application.To evaluate mixed-criticality system's performance,the network modeling method is developed based on the OPNET network simulation environment.Based on Open System Interconnection(OSI)model,layered modeling method is adopted to implement node model and process model of mixed-criticality system.By considering the character of time-triggered and event-triggered communication,through designing scheduling algorithm and fault-tolerant modes,the model realizes flexible configuration of simulation and verification of end-to-end delay jitter.The performance analysis from simulations proves that mixed-criticality system achieves determinism property of real-time traffic and is full compatible with non-real-time traffic of standard Ethernet.
作者 白江涛 吴巍 李文江 BAI Jiangtao;WU Wei;LI Wenjiang(The 54th Research Institute of China Electronics Technology Group Corporation(CETC), Shijiazhuang 050081,China)
出处 《电讯技术》 北大核心 2017年第11期1301-1306,共6页 Telecommunication Engineering
基金 中国载人航天预研项目(060301)
关键词 时间触发以太网 混合关键性网络 开放式系统互联模型 层次化建模 OPNET仿真 tim e-triggered ethernet m ixed-criticality network open system interconnection ( OSI) laryered modeling OPNET simulation
  • 相关文献

参考文献6

二级参考文献71

  • 1李于衡,关晖,李广鹏.OPNET在计算机网络和通信工程中的应用[J].无线电工程,2002,32(11):52-56. 被引量:7
  • 2刘鲁源,万仁君,李斌.基于TTCAN协议的网络控制系统静态调度算法的研究[J].控制与决策,2004,19(7):813-816. 被引量:22
  • 3孙松,孙川.测控网络中CAN总线及其实现[J].计量与测试技术,2004,31(7):23-25. 被引量:2
  • 4ISO 11898, Road vehicles-interchange of digital information-controller area Network for high-speed communication ISO [ S] 被引量:1
  • 5Kotzian J, Srovnal V. CAN based distributed control system modeling using UML[ C] //2003 IEEE International Conference on Industrial Technology. Maribor, Slovenia: IEEE, 2003,2 : 1012 - 1017 被引量:1
  • 6Acle J P, Reorda M S, Violante M. Early, accurate dependability analysis of CAN-Based networked systems[J]. Design & Test of Computers, 2006, 23(1 ) :38 -45 被引量:1
  • 7Donlin A. Transaction level modeling: flows and use models[ C] //Proceedings of the 2nd IEEE/ACM/IFIP International Conference on Hardware/Software Codesign and System Synthesis. Stockhohn, Sweden: CODES + ISSS, 2004:75-80 被引量:1
  • 8Schirner G, Domer R. Result-oriented modeling-a novel technique for fast and accurate TLM[J]. IEEE Trans on ComputerAided Design of Integrated Circuits and Systems, 2007,26(9) : 1688 - 1699 被引量:1
  • 9Pinho L M, Vasques F. Reliable real-time communication in CAN networks[J]. IEEE Transon Computers, 2003, 52( 12): 1594 - 1607 被引量:1
  • 10Punnekkat S, Hansson H, Norstrom C. Response time analysis under errors for CAN [ C ] //2000 Proceedings of Real-Time Technology and Applications Symposium. Washington: IEEE, 2000 :258 - 265 被引量:1

共引文献73

同被引文献4

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部