摘要
针对某电爆阀研制需求,设计了电爆阀用火工品输出燃气模拟装置并开展了试验研究。结果表明,电爆阀用火工品输出燃气模拟装置设计合理,与电爆阀用火工品输出压力历程较为接近,可满足某电爆阀研制需要。
According to the development requirements of the explosively actuated valve,deflagrable gas output simulating device was designed and tested.The results show that the device design is reasonable.Compared with gas outputs of the initiating explosive device for explosively actuated valve,the result is relatively similar,which mean the device can fulfill the development requirements of the explosively actuated valve.
作者
陈栋
徐勇
邓坤秀
CHEN Dong;XU Yong;DENG Kun-xiu(Institute of System Engineering CAEP,Mianyang,621999)
出处
《火工品》
CSCD
北大核心
2017年第3期27-29,共3页
Initiators & Pyrotechnics
关键词
电爆阀
火工品
输出燃气
模拟装置
压力
Explosively actuated valve
Initiating explosive device
Deflagrable gas output
Simulating device
Pressure
