1ZHANG H J, ZHAO W H, ZHANG J. Dynamic modeling and analysis of the high- speed bait screw feed system[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014 229(5): 870-877. 被引量：1
3WEI W M, ZHANG J, LU D, et al. Effect of tilting angle on the dynamics of tihing table driven by worm and worm wheel[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014,229(10): 1782-1791. 被引量：1
4WANG L, LIU H, YANG L, et al. The effect of axis coupling on machine tool dynamics determined by tool deviation[J]. International Journal of Machine Tools and Manufacture, 2015, 88: 71-81. 被引量：1
5LIANG T, LU D, ZHAO W H, et al. Feed fluctuation of ball screw feed systems and its effects on part surface quality[J]. Internatianal Journal of Machine Tools and Manufacture, 2015, lOh 1-9. 被引量：1
6YANG X J, LU D, ZHAO W H, et al. Dynamic electromechanical coupling resulting from the air-gap fluctuation of the linear motor in machine tools[J]. International Journal of Machine Tool and Manufacture, 2015, 94: 100-108. 被引量：1
7ALTINTAS Y, VERL A, BRECHER C, et al. Machine tool feed drives[J]. CIRP- Manufacturing Technology, 2011, 60: 779-796. 被引量：1
8GUO S J. Study on NURBS curve interpolation based on before acceleration/ deceleration with linear jerk[J]. Engineering Solutions for Manufacturing Processes, 2013, 655-657: 1200-1203. 被引量：1
9BEUDAERT X, PECHARD P Y, TOURNIER C. 5-axis tool path smoothing based on drive constraints[J]. International Journal of Machine Tools & Manufacture, 2011,51: 958-965. 被引量：1
10DONG J C, WANG T Y, LI B, et al. Smooth feedrate planning for continuous short line tool path with contour error constraint[j]. International Journal of Machine Tools and Manufacture, 2014, 76: 1-12. 被引量：1
