摘要
刀架是直接完成切削加工的执行部件。电动刀架主要有四工位,六工位,八工位,这里主要以四工位刀架PLC程序编写,介绍如何读取刀位,判断当前刀位与程序刀位不等,刀架正转找刀位换刀,再反转锁紧,出错发生报警处理等PLC程序编写。
@@@@rest is direct execution of finish machining parts, turret nc lathe turning tool carrier is the commonly used one kind of typical tool carrier, through the rotation of the tool post graduated positioning to achieve the automatic tool change machine. Are four station electric tool post, six-station, eight points, mainly four location tool post PLC programming, here show you how to read the tool, to judge the current tool and application tool, tool carriage forward looking for knife tool change, again turn lock, alarm processing and other PLC programming error occur.
出处
《电子制作》
2013年第5X期45-45,共1页
Practical Electronics
关键词
刀位
PLC控制
报警
tool
PLC control
call the police
