期刊文献+

Effect of heat treatment on strain–controlled fatigue behavior of cast Mg–Nd–Zn–Zr alloy 被引量:2

Effect of heat treatment on strain–controlled fatigue behavior of cast Mg–Nd–Zn–Zr alloy
原文传递
导出
摘要 The influence of heat treatment on the strain-controlled fatigue behavior of cast NZ30 K alloy was investigated. Compared with the as-cast and solutionized(T4) alloys, the peak-aged(T6) and over-aged(T7)counterparts have a higher cyclic stress and a lower plastic strain value due to the precipitation strengthening. The as-cast and T4-treated alloys have a higher fatigue strength/yield strength ratio than the aged alloys, which is mainly attributed to their higher cyclic hardening. Under stress-controlled loading,the aged alloys show lower hysteresis energies than the as-cast and T4-treated counterparts, leading to longer fatigue lifetimes. For the T4-treated alloy, the cyclic hardening and fatigue failure are controlled by the dislocations-slip and twinning, while for both the as-cast and T6-treated counterparts, they are controlled by the dislocation-slip. For the T7-treated alloy, cyclic deformation and failure behavior are mainly dependent on dislocations-slip and grain boundary sliding. The influence of heat treatment on the strain-controlled fatigue behavior of cast NZ30 K alloy was investigated. Compared with the as-cast and solutionized(T4) alloys, the peak-aged(T6) and over-aged(T7)counterparts have a higher cyclic stress and a lower plastic strain value due to the precipitation strengthening. The as-cast and T4-treated alloys have a higher fatigue strength/yield strength ratio than the aged alloys, which is mainly attributed to their higher cyclic hardening. Under stress-controlled loading,the aged alloys show lower hysteresis energies than the as-cast and T4-treated counterparts, leading to longer fatigue lifetimes. For the T4-treated alloy, the cyclic hardening and fatigue failure are controlled by the dislocations-slip and twinning, while for both the as-cast and T6-treated counterparts, they are controlled by the dislocation-slip. For the T7-treated alloy, cyclic deformation and failure behavior are mainly dependent on dislocations-slip and grain boundary sliding.
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2018年第11期2091-2099,共9页 材料科学技术(英文版)
基金 supported by the Key Research Project of Jiangxi Academy of Sciences(No.2017-YZD2-03) the Introduction Doctoral Program of Jiangxi Academy of Sciences(No.2016-YYB-09) the Collaborative innovation GSP Project of Jiangxi Academy of Sciences(No.2016-XTPH1-09)
关键词 Magnesium alloys Heat treatment Strain-controlled fatigue characteristics Hysteresis energies Cyclic deformation Magnesium alloys Heat treatment Strain-controlled fatigue characteristics Hysteresis energies Cyclic deformation
  • 相关文献

同被引文献7

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部