摘要
对啤酒生产线上压盖机上的凸轮机构进行理论分析,利用SolidWorks和VB提取凸轮轮廓线,并结合MATLAB对凸轮和滚子从动件进行动力学分析得到其速度、加速度、压力角等数据。分析得出现用的啤酒生产线上凸轮不合理的地方,为了改善其性能采用了三次样条曲线改善凸轮轮廓,经分析采用三次样条曲线拟合的凸轮轮廓减小了现用凸轮机构的柔性冲击,提高了压盖机的性能。
This paper makes a theoretical analysis of cam mechanism on the capping machine of beer production line, and using SolidWorks and VB to extract the cam contour line,then obtain the speed,acceleration and pressure angle data of cam and roller follower by combining MATLAB with dynamic analysis.The analysis shows that the cam is unreasonable.In order to improve its performance,three spline curves are used to improve the cam profile.After analyzing the cam profile fitted with three spline curves,the flexible impact of the present cam mechanism is reduced and the performance of the capping machine is improved.
作者
杨清艳
张魁榜
YANG Qing yan1,2 ,ZHANG Kui bang3(1. College of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei, Ankui 230601, China; 2. The Postdoctoral Workstation of Anhui Province Lu＇an Hengyuan Machinery Co., Ltd., Lu ＇an , Anhui 237100, China ; 3. School of Mechanical and Automotive Engineering, He f ei University of Technology, Hefei , Anhui 230009, China)
出处
《食品与机械》
CSCD
北大核心
2018年第7期101-105,共5页
Food and Machinery
基金
安徽省科技重大专项(编号:17030901039)
安徽省科技重大专项(编号:16030901016)
关键词
压盖机
凸轮机构
凸轮轮廓线
动力学分析
capping machine
cam mechanism
cam contour line
dy-namic analysis
