摘要
BEPC Ⅱ新参量流强探测器在束流高流强对撞模式下存在严重发热问题。为了稳定和精确的测量,对可能的发热原因进行了综合讨论,针对真空盒发热问题利用CST进行尾场模拟,以本征模计算得到稳态温度分布。对探测器发热问题利用等效的反射阻抗计算方法得到陶瓷狭缝的截止频率,从而有针对性地提出了实用的解决方案并得到了理想的实验结果。实验基本解决了BEPC Ⅱ探测器的发热问题,对今后流强探测器的改进和未来流强探测器的研发和设计有指导意义。
The new parametric current transformer（NPCT）in BEPC Ⅱ has heating problem in high current collide mode.To find the causes and perform stable and precise measurement,wakefield simulation and eigenmode calculation have been carried out by CST,and the steady-state temperature distribution is calculated.The cut-off frequency of ceramic gap is obtained by equivalent reflection-impedance calculation.A practical solution is put forward according to the analysis,and ideal experimental results are obtained.The experiment basically solves the heating problem,it could be a guide for current transformer（CT）improvement and applied to CT designs in the future.
作者
赵颖
何俊
汪林
随艳峰
曹建社
Zhao Ying;He Jun;Wang Lin;Sui Yanfeng;Cao Jianshe(Key Laboratory of Particle Acceleration Physics ＆ Technology,Institute of High Energy Physics,Chinese Academy of Sciences,Beijing 100049,China)
出处
《强激光与粒子束》
EI
CAS
CSCD
北大核心
2018年第8期151-155,共5页
High Power Laser and Particle Beams
基金
National Natural Science Foundation of China(11505196)
关键词
CST
流强探测器
发热
BEPC
Ⅱ
CST
new parametric current transformer
heating problem
BEPC Ⅱ
