摘要
在开源系统Open Wrt基础上,开发应用程序socket-support,并将6LBR移植到OpenWrt上。以TP-link的TLWR703N芯片和TI公司生产的低功耗CC1310芯片作为核心硬件平台,基于Contiki、6LBR与OpenWrt系统设计了一种6LoWPAN边界路由器。同时采用CC1310芯片设计了两个6Lo WPAN子节点,搭建了一个包含PC、子节点和边界路由器在内的物联网应用测试网络。测试结果表明,PC端可利用CoAP协议通过边界路由器实现对6LoWPAN子节点的数据采集与控制,可以应用于工业控制、环境检测、智能家居等多种场合,具有一定的应用价值。
Based on the open source system of Open Wrt,it develops application socket-support,and ports the 6LoWPAN/RPL border router（6LBR） to the Open Wrt. It Choses TL-WR703 N So C and CC1310DK as the core handware platforms, and relys on Contiki,6 LBR and Open Wrt, to design a 6LoWPAN border router. Meantime, it uses lowpower CC1310 chips produced by TI company to design two 6LoWPAN sub nodes, and buids a testing network of Internet of Things, including a PC, two 6LoWPAN nodes and a 6LoWPAN border router. The result shows that PC terminal can use Co AP protocol to realize the data acquisition and control of the 6LoWPAN node. This 6LoWPAN border router can be applied to some seenarios such as industrial control, environmmental monitor-ing, smart home and so on, and it has the certain application value.
作者
邬明彪
吴桂清
陈清华
Wu Mingbiao;Wu Guiqing;Chen Qinghua(College of Electrical and Information Engineering,Hunan University,Changsha 410082,China;1nsitute of Information Technology,Yangtze Delta Region Institute of Tsinghua University,.liaxing 314006,China)
出处
《电子技术应用》
2018年第7期64-67,共4页
Application of Electronic Technique
基金
浙江省科技厅省属科研院专项(2015F10028)
