摘要
本文提出了一种基于ARM开发平台的便携式示波器系统设计,该系统通过DMA与D/A转换器产生一路1KHz方波信号,用于信号校准;通过一路A/D转换器对待测信号进行采集,将采集的信号首先进行IIR滤波,滤除干扰信号[1],然后通过定时器、中断测得其电压有效值及其频率,将数据显示至LCD显示屏上,同时将当前时间及测得数据存入至SD卡中,并通过蓝牙无线传输至上位机,对所测得的数据进行备份。该方案解决了传统示波器笨重、不易携带、价格高昂等弊端的同时,大大提高了在复杂工作环境下进行信号检测的效率。
This paper presents a portable oscilloscope system based on ARM development platform, which generates1 KHz square wave signal along the way through DMA and D/A converter for signal calibration; Through the A/D converter along the way to collect the measurement signal, the collected signal is first filtered by IIR to filter out the interference signal, and then the effective voltage value and its frequency are measured by the timer and interrupt, and the data is displayed on the LCD display. At the same time, the current time and measured data are stored in the SD card and transmitted wirelessly to the upper computer via Bluetooth to back up the measured data. The scheme solves the disadvantages of traditional oscilloscopes such as heavy, difficult to carry, and high price, and greatly improves the efficiency of signal detection in complex working environments.
作者
郭宏伍
马东吉
黄金成
刘明雪
肖寒
GUO Hong-wu;MA Dong-ji;HUANG Jin-cheng;LIU Ming-xue;XIAO Han(Beihua University College of Electrical and Information Engineering,Jilin 132021,China)
出处
《科技视界》
2018年第12期243-244,共2页
Science & Technology Vision
