摘要
通过正交试验法研究PCD刀具干式车削Ti6Al4V时切削速度、进给量和切削深度对工件表面粗糙度和刀具后刀面磨损的影响。试验结果表明,切削速度为120-160m/min、进给量为0.15mm/r、切削深度为0.15mm时,可以获得理想的工件表面粗糙度和刀具后刀面磨损量。
Through orthogonal experiment in dry turning Ti6 Al4 V,the effects of cutting speed,feed rate and cutting depth on the work-piece surface roughness and tool flank wear are investigated. The experiment results show that with the cutting speed range of 120-160 m/min,the feed rate of 0. 15 mm/r and the cutting depth of 0. 15 mm,the ideal work-piece surface roughness and the tool flank wear can be obtained.
作者
贾云海
郭妍
郭建梅
朱立新
Jia Yunhai;Guo Yan;Guo Jianmei;Zhu Lixin(Beijing Institute of Electro-machining, Beijing 100191, China)
出处
《工具技术》
2018年第6期46-49,共4页
Tool Engineering
基金
北京市自然科学基金(3162013)
北京市科学技术研究院创新团队计划(IG201504N)
