摘要
主要研究循环冗余校验码(CRC)交织级联编码在正交相移键控(QPSK)通信系统的应用.首先完成了基于MATLAB/Simulink的QPSK通信系统的仿真设计,然后在QPSK系统中采用CRC进行信道编码,通过测试发现,系统接收和发送的信号波形一致,说明系统仿真设计合理有效.进一步将CRC编码和交织编码进行级联应用到QPSK系统.对比误码率数据发现,CRC编码能够有效降低系统误码率、改善系统的性能,编码增益能达到3dB,级联编码较CRC编码性能有进一步提高.这给出了通信系统仿真设计的一种新方法,为实验教学提供一种新思路.
We mainly make researches for CRC and interleaver in OPSK transmission system.We firstly design a QPSK transmission system based on MATLAB/Simulink platform,then CRC coding is applied in the QPSK transmission system.After debugging and testing,the received waveforms are consistent with the transmitted waveforms,which can indicate that the system design is effective.Further,we make concatenation CRC and Interleaver in QPSK system.According to data comparison,it can be concluded that CRC can decrease the symbol error rate and improve system reliability performance,up to 3 dB of the signal to noise ratio gain can be achieved.Concatenation coding can make a further performance improvement.This researches can give a new method for simulation design of communication system,and provides a new idea for experimental teaching.
作者
王晓玲
WANG Xiao-ling(School of Electronic and Information Engineering, Soochow University, Suzhou 215006, China)
出处
《微电子学与计算机》
CSCD
北大核心
2018年第5期84-88,共5页
Microelectronics & Computer
基金
苏州大学"十三五"省品牌专业培育项目(5831501216)
