期刊文献+

CRM-WB风洞模型高阶精度数值模拟 被引量:4

High-order numerical simulation of CRM-WB wind tunnel model
原文传递
导出
摘要 通过求解雷诺平均Navier-Stokes(RANS)方程,采用5阶空间离散精度的WCNS和多块对接结构网格技术,开展了CRM翼身组合体风洞试验模型的高阶精度数值模拟,计算构型和计算状态来自AIAA第6届阻力预测研讨会(DPWⅥ)。主要目的是采用高阶精度方法,评估静气动弹性变形和模型支撑装置对CRM翼身组合体数值模拟结果的影响。通过与刚性外形的计算结果和NASA NTF风洞试验结果的对比,高阶精度数值模拟结果表明:迎角为3.0°时,静气动弹性变形使得机翼上表面激波位置前移并显著降低了外侧机翼上表面激波位置前的负压;迎角为3.0°时,模型支撑装置使得机翼上表面激波位置进一步前移,并导致翼梢处机翼上表面流动结构发生变化;迎角为4.0°时,计算模型中没有包含模型支撑装置是导致升力系数下降的主要原因;计算模型中包含机翼静气动弹性变形和模型支撑装置的数值模拟结果更加接近试验结果。 A high-order numerical simulation of the Common Research Model(CRM)wing-body test model is presented by solving Reynolds-Averaged Navier-Stokes(RANS)equations with the fifth-order Weighted Compact Nonlinear Scheme(WCNS)and multi-block 1-to-1 structured grid.The test model and initial conditions are obtained from the sixth AIAA Drag Prediction Workshop(DPW Ⅵ).The purpose of present work is to assess the influence of the static aeroelastic deformation and support system on the numerical results of the CRM wing-body configuration by using high-order numerical method.Compared to the numerical results of the"rigid"CRM wing-body configuration and the experimental data from the NASA National Transonic Facility(NTF)wind tunnel,the high-order numerical results show that for 3.0°angle of attack,the static aeroelastic deformation moves the shock wave upward on the wing upper surface,and decreases the negative pressure before the shock wave;the support system moves the shock wave further upward and changes the flow structure near the wing tip.The main reason for the lift curve break at 4.0°angle of attack is that the computational model does not include the support system.The numerical results with the addition of the static aeroelastic deformation and support system into the calculation model match the experimental results more closely.
作者 王运涛 孟德虹 孙岩 李伟 WANG Yuntao;MENG Dehong;SUN Yan;LI Wei(Computational Aerodynamics Institute, Chine Aerodynamics Research and Development Center, Mianyang 621000, China;State Key laboratory of Aerodynamics, China Aerodynamics Research and Development Center, Mianyang 621000, Ohina)
出处 《航空学报》 EI CAS CSCD 北大核心 2018年第4期76-82,共7页 Acta Aeronautica et Astronautica Sinica
基金 国家重点研究发展计划(2016YFB0200700)~~
关键词 RANS方程 WCNS CRM 流场模拟 气动特性 RANS equations WCNS CRM flow simulation aerodynamic characteristics
  • 相关文献

参考文献3

二级参考文献35

  • 1邓小刚,刘昕,毛枚良,张涵信.高精度加权紧致非线性格式的研究进展[J].力学进展,2007,37(3):417-427. 被引量:21
  • 2张毅锋.高阶精度格式(WCNS)加速收敛和复杂流动数值模拟的应用研究[D].绵阳:中国空气动力研究与发展中心.2007. 被引量:2
  • 3恽起麟编著.风洞实验数据的误差与修正[M]. 国防工业出版社, 1996 被引量:1
  • 4T.C.S. Rendall,C.B. Allen.Efficient mesh motion using radial basis functions with data reduction algorithms[J].Journal of Computational Physics.2009(17) 被引量:1
  • 5T. C. S.Rendall,C. B.Allen.Unified fluid–structure interpolation and mesh motion using radial basis functions[J].Int J Numer Meth Engng.2008(10) 被引量:2
  • 6Xueqiang Liu,Ning Qin,Hao Xia.Fast dynamic grid deformation based on Delaunay graph mapping[J].Journal of Computational Physics.2005(2) 被引量:2
  • 7Deng X G, Maekawa H. Compact high-order accurate nonlinear schemes[J]. J. Comp. Phys., 1997, 130:77-91. 被引量:1
  • 8Deng X G, Mao M L, Weighted compact high-order nonlinear schemes for the euler equations[R]. AIAA 97-1941. 被引量:1
  • 9[KG2.6mm]Deng X G, Zhang H X. Developing high-order weighted compact nonlinear schemes[J]. J. Comp. Phys., 2000, 166:22-44. 被引量:1
  • 10Deng X G, Mao M L, Tu G H, et al. Geometric conservation law and applications to high-order finite difference schemes with stationary grids[J]. J. Comp. Phys., 2011, 230:1100-1115. 被引量:1

共引文献20

同被引文献33

引证文献4

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部