摘要
The chief aim of the present work was to achieve drag reduction in stator blades with liquid using boundary layer control. A stator blade of hydraulic torque converter with bionic grooves in suction side and hydrophobic surface in pressure side was designed. The hydrophobic surface was created using anodic oxidation method and irregular A1203 thin films were found on the surface. They formed hierarchical structure consisting of mini porous structures and microscopic pore spaces, resulting in the hydrophobicity. The bionic groove was designed by Computational Fluids Dynamics （CFD） method. Multi-Island Genetic Algorithm （MIGA） was adopted for groove multi-objective optimization. Through optimization, the maximum drag reduction was close to 12% in oil. In addition, the drag reduction calculation was verified by closed channel experiment and ＂Tire Vortex＂ was proposed to explain the drag reduction mechanism. The bionic Janus blade could maintain its initial profile without any additional device, which had lower risk and less cost. The results are encouraging and show great potential to apply in other flow machineries.
The chief aim of the present work was to achieve drag reduction in stator blades with liquid using boundary layer control. A stator blade of hydraulic torque converter with bionic grooves in suction side and hydrophobic surface in pressure side was designed. The hydrophobic surface was created using anodic oxidation method and irregular A1203 thin films were found on the surface. They formed hierarchical structure consisting of mini porous structures and microscopic pore spaces, resulting in the hydrophobicity. The bionic groove was designed by Computational Fluids Dynamics （CFD） method. Multi-Island Genetic Algorithm （MIGA） was adopted for groove multi-objective optimization. Through optimization, the maximum drag reduction was close to 12% in oil. In addition, the drag reduction calculation was verified by closed channel experiment and ＂Tire Vortex＂ was proposed to explain the drag reduction mechanism. The bionic Janus blade could maintain its initial profile without any additional device, which had lower risk and less cost. The results are encouraging and show great potential to apply in other flow machineries.
