摘要
采用多物理场计算程序COMSOL Multiphysics,构建了一维氚输运有限单元模型,并与文献中氢同位素在钨中的滞留实验数据进行模拟验证。基于经过校验的一维模型,并考虑Soret效应,对中国聚变工程实验堆(CFETR)水冷包层第一壁进行了二维氚分析计算。模拟结果表明,氚在单个典型包层第一壁中的总滞留量为0.12mg,进入冷却剂中的总渗透量为0.12mg.yr-1。若不考虑Soret效应,氚在RAFM钢中的滞留量将增加8.80%,渗透到冷却剂的量增加65.97%。由此可见,Soret效应对于氚的渗透和滞留具有显著的意义。
Based on the finite element method （FEM）, a one-dimensional tritium transport model is set up using COMSOL multiphysics. The model is benchmarked against literature results of hydrogen isotope retention in ttmgsten. Then a two-dimensional FW model of WCCB for China fusion engineering test reactor （CFETR） is built to analyze the transport of tritium, taking Sorer effect into account. The simulation results show that for a single typical blanket, total tritium retention in FW is 0.12mg, and the permeation amount into the coolant is 0.12mg.yr^-1. The retention in RAFM steel will increase by 8.80% while permeation to the coolant by 65.97% when the Soret effect is neglected. Therefore, the Soret effect is significant for the permeation and retention of tritium.
出处
《核聚变与等离子体物理》
CSCD
北大核心
2017年第4期457-464,共8页
Nuclear Fusion and Plasma Physics
基金
国家磁约束核聚变能发展研究专项(2013GB108004
2015GB108002)
中国科学院等离子体物理研究所基金项目(DSJJ-14-GC05)
