摘要
低压差线性电压调整器在便携应用中除需要实现电压转换功能外,还必须满足专用电路的噪声要求。噪声电压作为低压差线性电压调整器的关键指标之一,它限制电路能够处理的最小信号电平。为适应新型低压差线性电压调整器的低噪声测量需求,该文提出采用电池供电与实时信号分析仪相结合的噪声电压测试方法,该方法通过降低低压差线性电压调整器输入噪声对输出噪声的影响,具有测量精度较高、测试灵活、平台搭建简单等特点。文中对比分析采用直流电源供电与采用电池供电的噪声电压测试方法,实验结果表明:采用电池供电的噪声电压测试方法可以满足10μV量级的噪声电压测试需求,达到对低压差线性电压调整器噪声电压进行准确考核的目的。
In addition to realizing the function of voltage regulating, the low dropout linear regulator （LDO） shall also meet the noise requirement for specific circuit in portable applications. As a key indicator of LDO, noise voltage limits the minimum signal level that can be processedby the circuit. To meet the requirement of low noise measurement of a new LDO, a noise voltagetesting method using real time analyzing （signal analyzer） and battery powering is proposed. The presented method can reduce the effects of input noise of LDO on output noise and has the advantages of high measured accuracy, flexible testing and simple platform constructing. Two noise voltage testing methods, direct-current powering and battery powering, are compared in the paper. Results show that the presented method can measure low noise voltage whose level ups to 10 滋 V ,so that it can reach the goal of precise evaluation of low noise voltage of LDO.
出处
《中国测试》
北大核心
2017年第11期22-25,共4页
China Measurement & Test
