期刊文献+

白光LED不舒适眩光模型的验证和优化 被引量:10

Validation and Optimization of Discomfort Glare Model for White LED
原文传递
导出
摘要 为了验证小尺寸光源的不舒适眩光评估模型对LED的适用性,使用两种色温的白光LED产生不舒适眩光,在4种眩光源亮度和4种观察角度下进行实验,并在每种条件下进行deBoer评分。实验结果表明,白光LED的偏心角增大,会增加亮度对比度;白光LED的亮度越大,偏心角越小,则deBoer评分越高,即产生更多的不舒适眩光。对小尺寸光源模型UGRsmall以及位置系数修正模型UGRS1和UGRS2进行实验验证,结果表明模型计算值与主观实验不舒适眩光评分的相关性较高。将UGRS2模型增加优化系数并进行优化得到模型UGRSa,将偏心角加入模型UGRsmall并修正后得到UGRSk,UGRSa和UGRSk均具有更好的性能。 In order to verify the applicability of the discomfort glare evaluation model of small size light source to LED,the discomfort glare is generated by white LED of two kinds of color temperature.The experiment is conducted under four kinds of glare luminance and viewing angles.Observers are asked to give a deBoer rating score under each condition.The results show that lager eccentric angle of white LED leads to lager contrast ratio.Lager glare luminance and smaller eccentric angle lead to higher deBore rating score,namely more discomfort glare.The small size light source model UGRsmalland the position coefficient modified models UGRS1 and UGRS2are verified experimentally.The results show the high correlation between the calculated value of the model and the subjective experiment of discomfort glare rating.Further,model UGRSais obtained by adding optimal coefficients of UGRS2 and optimizing them.Model UGRSkis obtained by adding eccentric angle into model UGRsmalland correcting it.UGRSaand UGRSk both have better performance.
出处 《光学学报》 EI CAS CSCD 北大核心 2017年第7期368-374,共7页 Acta Optica Sinica
基金 复旦大学第三批"卓学计划"
关键词 视觉光学 不舒适眩光评估模型 UGRsmall 验证和优化 visual optics discomfort glare evaluation model UGRsmall validation and optimization
  • 相关文献

参考文献5

二级参考文献47

  • 1Zexin Feng, Yi Luo, Yanjun Han. Design of LED freeform optical system for road lighting with high luminance/illuminance ratio[J]. Opt. Express, 2010, 18(21): 22020-22031. 被引量:1
  • 2Xing Zhao, Zhiliang Fang, Jicheng Cui et al.. Illumination system using LED sources for pocket-size projectors[J]. Appl. Opt., 2007, 46(4): 522-526. 被引量:1
  • 3Fei Chen, Sheng Liu, Kai Wang et al.. Free-form lenses for high illumination quality light-emitting diode MR16 lamps[J]. Opt. Eng., 2009, 48(12): 123002. 被引量:1
  • 4陈金发, 郑志明, 陈俊杰. 一种高效智能的红外照明系统[P]. 中国专利, CN 101950117A. 被引量:1
  • 5陈金发, 郑志明, 陈俊杰. 一种内置可变角度红外照明系统的智能型高速球[P]. 中国专利, CN 101800851A. 被引量:1
  • 6Jin-Jia Chen, Chin-Tang Lin. Freeform surface design for a light-emitting diode-based collimating lens[J]. Opt. Eng., 2010, 49(9): 093001. 被引量:1
  • 7Kuang-Lung Huang, Jin-Jia Chen, Te-Yuan Wang et al.. Free-form lens design for LED indoor illumination[C]. SPIE, 2010, 7852: 78521D. 被引量:1
  • 8Feng Zhao. Practical reflector design and calculation for general illumination[C]. SPIE, 2005, 5942: 59420J. 被引量:1
  • 9M. Schmid, D. Kuebrich, M. Weiland et al.. Evaluation on the efficiency of power LEDs driven with currents typical to switch mode power supplies [ C]. Proceedings of IEEE Industry Applications Conference, 42nd IAS Annual Meeting, 2007. 1135-1140. 被引量:1
  • 10J. Garcia, D. G. Lamar, M. A. Costa et al.. An estimator of luminous flux for enhanced control of high brightness LEDs [C]. Proceedings of IEEE PESC, 2008. 1852-1856. 被引量:1

共引文献59

同被引文献62

引证文献10

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部