摘要
开展了蜂窝夹层玻璃钢复合材料的铣削加工工艺试验,对比了不同装夹方式和工艺参数的加工效果,得出了表面质量良好的蜂窝夹层玻璃钢复合材料铣削加工方案。试验表明,采用硬质合金刀具,较小的转速和进给量,较大的切削深度,干式切削,就能铣削出表面质量良好的蜂窝板工件。
Experimental studies on milling of honeycomb sandwich composite are carried out. Through experiments the processing results of different clamping methods and process parameters are compared. Milling process of honeycomb sand-wich fiberglass composites with good surface quality is obtained. The use of carbide cutting tools with smaller speed and feed, and large cutting depth and dry cutting could be useful for milling the surface of a good quality honeycomb board work-piece.
出处
《新技术新工艺》
2017年第4期74-77,共4页
New Technology & New Process
关键词
玻璃钢
蜂窝夹层复合材料
分层
脱粘
工艺试验
FRP, honeycomb sandwich composite, delamination, debond, process test
