期刊文献+

方管截面铝合金轴心受压构件力学性能研究

Study on mechanical performance of box-section aluminium alloy members under axial compression
下载PDF
导出
摘要 通过有限元软件ANSYS构建非线性数值模型,并利用现有试验数据进行模型准确性验证。分析了板件宽厚比、截面尺寸效应以及是否约束某一主轴方向位移对构件稳定承载力的影响,发现三者影响均可不予考虑。在大规模参数分析的基础上,建议对于6061-T6,几何缺陷系数中的两个参数分别取α=0.17和λ=0.09,对于6061-T4建议取α=0.21和λ=-0.14。对比中、欧规范计算结果发现,该建议与试验及参数分析结果具有更好的吻合性,满足计算精度和安全度的工程设计要求。 To study the mechanical properties of box-section aluminium alloy members under axial loading, a non-linear numerical (finite element) model was constructed by finite element algorithm ANSYS. The model was verified by experimental data. The influences of the alloy member (plate) width to thickness ratio, the section size and the constraint of a principal axis displacement on the beating capacity of the alloy members were analysed, showing that the influences of the three factors can be neglected. For alloy member 6061-T6, the geometric defect coefficient α = 0.17 and λ^-= 0.09 were obtained, and for 6061-T4, α = 0.21 and λ^-=- 0.14 were recommended. The results indicate that the proposed values are in agreement with the experimental and the parameter analysis results, which can meet the engineering design requirements of the calculation accuracy and safety.
出处 《福建工程学院学报》 CAS 2017年第1期21-25,共5页 Journal of Fujian University of Technology
基金 国家自然科学基金项目(51208109) 福建省高校青年自然基金重点项目(JZ160465) 福建省高校杰出青年科研人才培育计划项目(JA13209)
关键词 铝合金 轴心受压构件 方管截面 稳定系数 非线性有限元分析 aluminium alloy axially loaded member box section stability coefficient nonlinear finite element analysis
  • 相关文献

参考文献4

二级参考文献22

共引文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部