期刊文献+

Tribological Behavior of TiAl-Multilayer Graphene-Ag Composites at Different Temperatures and Sliding Speeds 被引量:3

Tribological Behavior of TiAl-Multilayer Graphene-Ag Composites at Different Temperatures and Sliding Speeds
原文传递
导出
摘要 Tribological behavior of TiAl-multilayer graphene-Ag composites (TMACs) prepared by spark plasma sin- tering against a Si3N4 ball was investigated on a ball-on-disk high-temperature tribometer at different test temperatures and sliding speeds in this study. The test results showed that TMACs had the lower friction coefficient and less wear rate at 450 ℃-0.25 m/s, which was attributed to the formation of the high-strength and intact tribofilms on worn surface. At 450 ℃-0.25 m/s, during the sliding process, multilayer graphene (MLG) was ground out to form the high-strength skeletons on the wom surface of TMACs. Ag was migrated from the worn surface and combined with the MLG skeleton to form the high-strength and intact tribofilms. The high-strength and intact tribofilms were beneficial to lowering the friction coefficient for the lubricating effect of Ag and decreasing wear rate for the enhancing effect of MLG skeleton. Tribological behavior of TiAl-multilayer graphene-Ag composites (TMACs) prepared by spark plasma sin- tering against a Si3N4 ball was investigated on a ball-on-disk high-temperature tribometer at different test temperatures and sliding speeds in this study. The test results showed that TMACs had the lower friction coefficient and less wear rate at 450 ℃-0.25 m/s, which was attributed to the formation of the high-strength and intact tribofilms on worn surface. At 450 ℃-0.25 m/s, during the sliding process, multilayer graphene (MLG) was ground out to form the high-strength skeletons on the wom surface of TMACs. Ag was migrated from the worn surface and combined with the MLG skeleton to form the high-strength and intact tribofilms. The high-strength and intact tribofilms were beneficial to lowering the friction coefficient for the lubricating effect of Ag and decreasing wear rate for the enhancing effect of MLG skeleton.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2017年第3期193-200,共8页 金属学报(英文版)
基金 supported by the National Natural Science Foundation of China(51275370) Self-determined and Innovative Research Funds of WUT(135204008) the Fundamental Research Funds for the Central Universities(2016-YB-017 and 2016-zy-014)
关键词 Solid lubricant additives Self-lubricating composites Self-lubricated WEAR Solid lubricant additives Self-lubricating composites Self-lubricated Wear
  • 相关文献

同被引文献51

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部