摘要
有机-无机金属卤素钙钛矿太阳能电池作为新一代光伏技术已经吸引到众多关注。近期研究表明,不管是在介空结构还是平面异质结结构的钙钛矿电池中,每次钙钛矿效率的重大突破都归因于钙钛矿薄膜质量的提高。钙钛矿太阳能电池与其他多晶薄膜太阳能电池相似,增加晶粒尺寸和减少晶界可以极大的增加器件效率。在本文中,钙钛矿薄膜形貌和结晶度在最优化的热处理过程可以得到极大的改善和提高。我们制备的高性能平面异质结钙结构钙钛矿太阳能电池,获得了17.81%的最高效率和17.44%±0.5%的平均效率。
Organic inorganic halide perovskite solar cells （ PSCs） have drawn a lot attention as a new generation of photovoltaic technology. The rapid increase in power conversion efficiency （ PCE） of PSCs has been mainly achieved by improving growth quality of the perovskite films for both mesoporous structure and planar heterojunction structure perovskite solar cells. Similar to any polycrystalline thin film solar cells, larger perovskite grains with less grain boundaries have been shown to increase the efficiency of PSCs. Herein,we verified that the growth of CH3NH3PbI3 film yields a dramatically improvement of crystallinity and enhancement of perovskite gain size by employing an optimal annealing process. The best performing planar device obtained with this procedure has an efficiency of 17. 81% under AM 1. 5G illumination and an average power conversion efficiency of 17.44% ±0.5%.
作者
张帆
叶帅
郝玉英
王云才
宋军
ZHANG Fan YE Shuai HA WANG Yun-cai S(College of Physics and Optoelectronics, Taiyuan University of Technology,Taiyuan 030024,China College of Optoelectronic Engineering, Shenzhen University, Shenzhen 518060,China)
出处
《人工晶体学报》
EI
CAS
CSCD
北大核心
2016年第9期2215-2221,共7页
Journal of Synthetic Crystals
基金
国家自然科学基金(61620106016
61525503
61378091
61405123)
关键词
钙钛矿
溶剂工程法
溶剂退火
平面异质结
perovskite
solvent-engeering
solvent-annealing
planar heterojunction
