期刊文献+

利用单杆矢量法研究曲柄滑块机构刚体导引综合 被引量:1

Research on rigid-body guidance synthesis of crank-slider mechanism using monad vectors
下载PDF
导出
摘要 文中将单杆矢量的相对位移差用于建立曲柄滑块机构刚体导引综合方程式。提出和分析了单杆矢量法的两种基本形式,建立了曲柄滑块机构刚体导引综合方程式。通过总次数和混合体积分析,表明单杆矢量法总次数与双杆组法相同,两者的混合体积接近。但单杆矢量法比双杆组法模块性更强,能更直接地建立机构的综合方程式。最后通过实例讨论了单杆矢量法曲柄滑块机构刚体导引四位置综合问题的应用。在用同伦法求该方法建立的机构综合方程组的全部解时,具有较高的求解效率,且方程模块性强,适合于通过计算机建模解决曲柄滑块机构刚体导引运动综合问题。 This paper used the relative displacement differences of monad vectors to establish comprehensive equations of crank-slider mechanism's rigid-body guidance comprehensive equation. Two basic types of the monad vectors were proposed and analyzed. The times of monad vector method was the same as the double method, and the mix volumes of these methods were closely. However, the modularity of the monad vectors method was better than the double method, which could establish the synthesizing equations. An example was illustrated to discuss the comprehensive applications of the monad vectors crank-slider mechanism's rigid-body guidance synthesis problems. The solution efficiency was relative high and the modularity of equations was relative strong while solving the mechanism synthesis equations established from this method using homotopy method. The method was suitable to solve the synthesizing problems of crank-slider mechanism's rigid-body guidance problems through the computer modeling.
作者 周球 王淑可 王成志 代婷 ZHOU Qiu WANG Shu-ke WANG Cheng-zhi DAI Ting(School of Mechanical and Energy Engineering, Jimei University, Xiamen 361021 Forestry bureau of Yongan, Fujian Province, Yongan 366000)
出处 《机械设计》 CSCD 北大核心 2016年第9期37-40,共4页 Journal of Machine Design
基金 福建省自然科学基金资助项目(2012J01225)
关键词 机构综合 曲柄滑块机构 单杆矢量相对位移差 刚体导引 mechanism synthesis crank-slider mechanism relative displacement differences of monad vectors rigid-body guidance
  • 相关文献

参考文献10

  • 1Suh C H, Radcliffe C W. Synthesis of plane linkages with use of the displacement matrix[J]. Journal of Engineering for Industry, 1967(89B) : 206-214. 被引量:1
  • 2Yang Tong, Han Jianyou, Yin Lairong. A unified synthesis method based on solution regions for four finitely separated and mixed "Point-Order" positions [J].Mechanism and Ma- chine Theory, 2011,46 ( 11 ) : 1719-1731. 被引量:1
  • 3曹惟庆等著..连杆机构的分析与综合[M].北京:科学出版社,2002:314.
  • 4Erdman A G. Three and four precision point kinematic syn- thesis of plane linkages [J]. Mechanism and Machine Theo- ry, 1979, 16(3): 227-245. 被引量:1
  • 5傅则绍,卢子馨主编..机构设计 修订版[M].东营:石油大学出版社,1998:381.
  • 6刘安心,杨廷力著..机械系统运动学设计[M].北京:中国石化出版社,1999:152.
  • 7Wampler C W, Morgan A P, Sommese A J. Numerical con- tinuation methods for solving polynomial systems arising in kinematics [J]. Journal of Mechanical Design, 1990,112( 1 ) : 59-68. 被引量:1
  • 8Canny J, Rojas J M. An optimal condition for determining the exact number of roots of a polynomial system [ C ] //Watt S M, Proceedings of the 1991 International Symposium on Symbolic and Algebraic Computation. New York: ACM Press, 1991 : 96-101. 被引量:1
  • 9Wang Chengzhi. Rigid-body guidance synthesis of four-bar ; linkages with use of the relative displacement differences of monad vectors[J]. Applied Mechanics and Materials, 2013, 328 : 437-443. 被引量:1
  • 10Ceecarelli Marco, Koetsier Teun. Burmester and allievi: A theory and its application for mechanism design at the end of the 19th century [C] //Philadelphia, Pennsylvania, USA: IDECT/CIE, 2006 : 1-10. 被引量:1

同被引文献7

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部