期刊文献+

大直径集束式潜孔锤反循环钻进技术研究 被引量:5

Research on reverse circulation drilling technique of large-diameter cluster DTH hammer
下载PDF
导出
摘要 针对大直径集束式潜孔锤反循环钻进试验发现的问题,选型配套了大规格双壁钻杆,改进设计了大直径集束式反循环潜孔锤和孔口密封装置等关键装置。依托某大直径工程项目进行了现场试验,结果显示:大直径集束式潜孔锤反循环钻进平均机械钻速3.41 m/h,与同条件下大直径牙轮钻头正循环钻进相比,效率提高了3.2倍;与原大直径集束式潜孔锤反循环钻进相比,效率提高了60%。 For the problem of large diameter cluster DTH hammer reverse circulation drilling tests found,large size double wall drill pipes were selected,and the design of the large diameter cluster of reverse circulation DTH hammer and port seal device were improved. The field test was carried out based on a large diameter project. Results show that, the average mechanical drilling speed of the reverse circulation drilling was 3.41 m/h. Compared with large diameter roller bit drilling under the same conditions,the efficiency is improved by 3.2 times,the efficiency is improved by 60% compared with the original large diameter cluster DTH hammer reverse circulation drilling.
出处 《中州煤炭》 2016年第6期119-122,共4页 Zhongzhou Coal
基金 第一批安全科技"四个一批"科研攻关项目 中国煤炭科工集团有限公司技术创新基金面上项目(2016MS005)
关键词 大直径钻孔 反循环潜孔锤 孔口密封装置 双壁钻杆 反循环钻进 large diameter borehole reverse circulation DTH hammer port seal device double wall drill pipe reverse circulation drilling
  • 相关文献

参考文献15

二级参考文献81

共引文献157

同被引文献61

引证文献5

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部