摘要
低碳钢丝的拉拔机卷筒磨损后会制约生产的顺行.卷筒磨损主要出现在根部及以上30 - 40mm 处,根据这一特点对卷筒结构进行了改进设计.设计成分体式卷筒：一部分为卷筒本体,一部分为活动件.卷筒本体稍作改动,活动件成4 等分环形用螺栓固定在卷筒本体上,能便捷拆装.当卷筒根部出现磨损后只需更换活动件,不必整体吊装卷筒.避免了卷筒本体损耗, 降低了备用卷筒数量,消除了卷筒磨损对生产的制约.
The low carbon steel wire drawing machine drum wear will restrict the production smoothly running, accordingto the characteristics of drum wear mainly in the roots and more than 30 ~ 40mm, the drum structure is improved .Splittype drum design： a part of the drum body and a part of the activities. The main body of the drum is slightly changed, andthe movable part is fixed on the main body of the drum by 4 equal parts of the ring and can be easily disassembled and assembled.When the root of the drum appears to wear only after the replacement of the active parts, do not have to the overalllifting of the drum. The drum body loss is avoided, the number of the spare drum is reduced, and the restriction of theroll wear on the production is eliminated.
出处
《新疆钢铁》
2016年第1期39-41,共3页
Xinjiang Iron and Steel
关键词
拉丝机
卷筒
磨损
分体式
drawing machine
drum
wear
split type
