摘要
在医院、教学楼等建筑中广泛采用隔震技术,能降低地震对上部结构的破坏作用。虽然隔震技术经过几十年的发展已趋于成熟,但环境及其他荷载对隔震结构性能的影响规律、结构设计的合理性以及震后结构状态评估等问题,仍需建立隔震结构健康监测系统对施工、运营期的结构响应进行监测,并对其进行评估与验证。首先,针对基础隔震结构的特点,研究了基础隔震结构的主要监测内容;在此基础上提出基础隔震结构健康监测系统的总体设计要求及原则,根据不同监测对象(整体与局部监测量)给出基础隔震结构传感器布置原则和数据采集系统软硬件设计原则,提出基础隔震结构设计验证与安全评定方法;最后给出基础隔震结构健康监测值得进一步研究的问题。
Due to reduce the damaging effect of superstructures subjected to strong earthquakes,isolation technology is widely used in infrastructure construction,such as in hospitals,teaching buildings,and so on.Many significant research achievements have been achieved with respect to base-isolated structures（BISs）.Although isolation technology has been maturing over several decades of development,a number of questions remain.The influence on BISs subjected to strong ground motion,and environmental and other loads,the rationality of structure design,and the performance of BISs buildings that have experienced earthquakes must still be verified by structural health monitoring operation.A BIS structural health monitoring system consists of sensory system,data acquisition and transmission system,data processing and control system,structural health data management system,structural health evaluation system,and inspection and maintenance system.Based on site inspections,prior monitoring of dynamic parameters based on BIS characteristics has been proposed.The monitored data should include seismic ground motion,temperature and humidity of the isolation layer,the foundation settlement and wind load（high-rise BISs）,horizontal and vertical static displacement of the isolation bearings,vertical strain on the isolation bearings and strain of the isolation layer girder,and horizontal and vertical dynamic displacement of the isolation bearings and acceleration response of the superstructure.Considering the BIS characteristics,in this paper,we propose the primary subjects to be monitored,and consider the general overall design requirements of a BIS health monitoring system.According to different monitoring variables（global and local）,we propose basic principles for the sensors selection and layout,and the hardware and software designs of the data acquisition and transmission system.We also present approaches to the design verification and safety performance evaluation.Finally,we address the problems which need to be further st
出处
《地震工程学报》
CSCD
北大核心
2016年第1期94-102,共9页
China Earthquake Engineering Journal
基金
国家自然科学基金(51578247
51178211
51568041)
甘肃省青年科技基金计划(148RJYA004)
兰州理工大学建筑工程系七七级校友奖励基金(TM-QK-1307)
关键词
基础隔震结构
结构健康监测
系统设计
性能评估
base-isolated structure
structural health monitoring
system design
performance evaluation
