摘要
在介绍旋转加速度计重力梯度仪仿真系统构成的基础上,依据旋转加速度计重力梯度仪测量原理,给出重力梯度信号仿真方法。信号仿真流程为:由计算机产生加速度计数字输出,经数模转换、模拟信号运算、放大、模数转换和数字解调,得到重力梯度数值。采用这种重力梯度信号仿真方法,可以详细研究旋转加速度计重力梯度仪的信号特征、参数调整、误差补偿以及信号处理方法,为重力梯度仪系统设计研发提供方法指导。
This paper presents the simulation system of gravity gradiometer of rotating accelerometer and,according to the working principle of gravity gradiometer of rotating accelerometer,puts forward the method for gravity gradient signal simulation. The process of simulating gravity gradient signal is as follows: digit signals of accelerometers are produced by computer and gravity gradient is obtained through digit and analog conversion,analog operation,amplification,filter,analog and digit conversion,and modulation. By using this simulation method,the signal characteristics,parameter adjustment,error compensation and signal processing method can be further studied,and the results can serve as references for gravity gradiometer instrument design and development.
出处
《物探与化探》
CAS
CSCD
2015年第B12期76-79,共4页
Geophysical and Geochemical Exploration
基金
国家高技术研究发展计划"863计划"项目(2011AA060501)
关键词
重力梯度仪
旋转加速度计
信号仿真
梯度解调
gravity gradiometer instrument(GGI)
rotating accelerometer
signal simulation
gravity gradient demodulation