期刊文献+

基于最优小波包Shannon熵的再制造电机转子缺陷诊断技术 被引量:23

Flaw Diagnosis Technology for Remanufactured Motor Rotor Based on Optimal Wavelet Packet Shannon Entropy
下载PDF
导出
摘要 为了实现对再制造电机转子质量的有效监控,采用超声波技术对其内部缺陷进行检测与评价。引入滤波效果良好的最优小波包滤波法和对超声波信号噪声含量变化敏感的Shannon信息熵算法,定义一种新的最优小波包Shannon熵(Best wavelet packet Shannon entropy,BWPSE)的概念,并提出基于BWPSE的超声波信号消噪方法。对采集到的再制造电机转子超声检测信号进行最优小波包滤波处理,得到各尺度的小波包分解系数,在此基础上计算各尺度小波包分解系数的Shannon熵,通过分析小波包系数Shannon熵的变化规律确定分解层数及阈值。采用该方法对再制造电机转子超声检测信号进行消噪处理,结果表明该方法对噪声消除比较彻底,对比Sqtwolog阈值小波分析及Heursure阈值小波分析等其他信号消噪方法,该方法可显著提高再制造电机转子内部缺陷定量分析的准确度。 In order to monitor the quality of remanufactured motor rotor effectively,ultrasonic technology is used for testing and evaluation of its internal flaws.Considering that best wavelet packet filter is good at filtering and shannon information entropy algorithm is sensitive to variation of noise content in ultrasonic signal,the two algorithms are integrated together,then a new conception named best wavelet packet Shannon entropy(BWPSE) is proposed,a new de-noising method based on BWPSE is proposed.The gathered ultrasonic testing signal of remanufactured motor rotor is processed by way of BWPSE,and the wavelet packet decomposition coefficients of each scale are gotten,which are employed to calculate the shannon entropy of each scale,by analyzing the variation of Shannon entropy,the decomposition level and threshold are determined.The proposed method are verified with the de-nosing result of remanufactured motor rotor,which prove that the BWPSE method is in favor of enhancing the accuracy of quantitative analysis for the flaw inside the remanufactured motor rotor,comparing with other de-nosing methods such as wavelet analysis based on Sqtwolog threshold and Heursure threshold,etc.
出处 《机械工程学报》 EI CAS CSCD 北大核心 2016年第4期7-12,共6页 Journal of Mechanical Engineering
基金 国家自然科学基金(50975287) 国家重点基础研究发展计划(973计划 2011CB013405)资助项目
关键词 小波包Shannon熵 再制造电机转子 缺陷 超声检测 matrix modelconstraints optimization Monte Carlo tolerance
  • 相关文献

参考文献16

  • 1徐滨士,朱绍华编著..表面工程的理论与技术[M].北京:国防工业出版社,2010:403.
  • 2施小豹,曹婷婷.电机再制造技术探讨[J].电机与控制应用,2012,39(12):43-45. 被引量:14
  • 3张晓东,董世运,王志坚,闫世兴,徐滨士,李庆芬.激光再制造金属零件熔覆层组织及耐磨性能[J].焊接学报,2010,31(2):75-78. 被引量:24
  • 4KIM H J, SONG S J, SCHMERR L W. An ultrasonic measurement model using a multi-Gaussian beam model for a rectangular transducer[J]. Ultrasonics, 2006, 44.. 969-974. 被引量:1
  • 5ZHAO Xinyu, GANG Tie. Nonparaxial multi-Gaussian beam models and measurement models for phased array transducers[J].Ultrasonics, 2009, 49(1): 126-130. 被引量:1
  • 6ZHAO Xinyu, GANG Tie, XU Chunguang. Prediction of side-drilled hole contact probe signals captured by a dualc rystal[J]. Journal of Nondestructive Evaluation, 2010, 29(2). 105-110. 被引量:1
  • 7刘守山,杨辰龙,李凌,周晓军.基于自适应小波阈值的超声信号消噪[J].浙江大学学报(工学版),2007,41(9):1557-1560. 被引量:28
  • 8GUIDO B, GIOVANNI L, JACOPO B. On the analysis of fluctuating velocity signals through methods based on the wavelet and Hilbert transforms [J]. Chaos, Solitons andFractals, 2004, 20: 149-158. 被引量:1
  • 9DONOHO D L. De-noising by soft threshold[J]. IEEE Transaction on Information Theory, 1995, 41(3): 617-627. 被引量:1
  • 10张德丰著..MATLAB小波分析[M].北京:机械工业出版社,2009.

二级参考文献51

共引文献152

同被引文献224

引证文献23

二级引证文献175

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部