期刊文献+

射频识别标签天线的按需微喷射制备 被引量:4

Fabrication of RFID tag antennas based on drop-on-demand technology
下载PDF
导出
摘要 基于数字化微喷射技术搭建了射频识别(RFID)标签天线的按需微喷射制备系统。首先,将纳米银导电墨水按需微喷射到镀有疏水化薄膜的聚对苯二甲酸乙二醇脂(PET)基底表面形成天线图形;然后在恒温干燥箱内烧结,形成RFID标签天线。实验研究了微喷射系统参量对液滴产生的影响以及制备参数对纳米银导线成线的影响,制得了最小线宽为100μm、厚度为2.8μm、电阻率为5.2μΩ·cm且阻值具有较好线性度的导线。设计、仿真和制备了弯折偶极子天线,并对其性能参数进行了测试,结果显示其天线谐振频率、带宽和谐振点S11参数等与仿真结果具有较好的一致性。实验结果表明,按需微喷射导电银墨水制备RFID标签天线的方法具有系统结构简单、成本较低、液滴微喷射精确、便于制备任意天线图形等特点;制备的弯折偶极子天线尺寸可控、导电性高、阻值均一性好,并具有较好的天线性能。 A system for the fabrication of RFID(Radio Frequency Identification)tag antenna was setup based on a digital drop-on-demand technology.Firstly,the conductive ink was jetted on the polyethylene terephthalate(PET)substrate with a hydrophobic thin film to form the designed antenna pattern.Then the conductive pattern was sintered to form the RFID tag antenna in an oven.The influences of the system parameters on the generation of droplets and the fabrication parameters on the formation of the conductive line were researched.The conductive line with a width of 100μm,a thickness of 2.8μm and the resistivity of 5.2μΩ·cm was obtained,and its resistance was almost proportional to the length.Furthermore,a folded dipole antenna was designed,simulated and fabricated,and the performance of the antenna was measured.The results show that the resonant frequency,bandwidth and the S11 parameters of the antenna fabricated are in agreement with the simulation results.The experimental results indicate that the fabrication of the RFID tag antennabased on the drop-on-demand technology has advantages in simple system construction,low cost,accurate droplet ejection and a flexible antenna pattern.Moreover,the folded dipole antenna is characterized by size controllability,high conductivity,good resistance uniformity and good antenna performance.
出处 《光学精密工程》 EI CAS CSCD 北大核心 2016年第1期73-82,共10页 Optics and Precision Engineering
基金 国家自然科学基金资助项目(No.51175268) 江苏省三维打印装备与制造重点实验室开放基金资助项目(No.BM2013006) 江苏省博士后科研资助计划资助项目(No.14020068)
关键词 射频识别标签天线 按需微喷射系统 纳米银导电墨水 疏水化薄膜 弯折偶极子天线 Radio Frequency Identification(RFID)tag antenna drop-on-demand system nano-silver conductive ink hydrophobic thin film folded dipole antenna
  • 相关文献

参考文献17

  • 1RIDA A, VYAS R, BASAT S, et al.. Paper-based ultra-low-cost integrated RFID tags for sensing and tracking applications [C],Electronic Components and Technology Conference, IEEE, 2007: 1977-1980. 被引量:1
  • 2VIRTANEN J,UKKONEN L, BJORNINEN T, et al.. Inkjet-printed humidity sensor for passive UHF RFID systems[J]. Instrumentation and Measurement, IEEE Transactions on, 2011, 60(8): 2768-2777. 被引量:1
  • 3林其水.RFID标签天线的三种制作方法[J].印制电路信息,2010(3):30-35. 被引量:4
  • 4BJ?RNINEN T, MERILAMPI S, UKKONEN L, et al.. The effect of fabrication method on passive UHF RFID tag performance [J]. International Journal of Antennas and Propagation, 2009. 被引量:1
  • 5SHIN D Y, LEE Y, KIM C H. Performance characterization of screen printed radio frequency identification antennas with silvernanopaste [J]. Thin Solid Films, 2009, 517(21): 6112-6118. 被引量:1
  • 6LILJA K E, B?CKLUND T G, LUPO D, et al.. Gravure printed organic rectifying diodes operating at high frequencies [J]. Organic Electronics, 2009,10(5): 1011-1014. 被引量:1
  • 7安君,唐正宁,车永华.柔性版印刷网点扩大问题的分析[J].包装工程,2006,27(4):146-148. 被引量:7
  • 8YANG L,RIDA A, VYAS R, et al.. RFID tag and RF structures on a paper substrate using inkjet-printing technology [J]. Microwave Theory and Techniques, IEEE Transactions on, 2007, 55(12): 2894-2901. 被引量:1
  • 9ALLEN M L,JAAKKOLA K, NUMMILA K, et al.. Applicability of metallic nanoparticle inks in RFID applications [J]. Components and Packaging Technologies, IEEE Transactions on, 2009, 32(2): 325-332. 被引量:1
  • 10章维一,侯丽雅.微流体数字化的科学与技术问题(I):概念、方法和效果[J].科技导报,2005,23(8):4-9. 被引量:41

二级参考文献100

共引文献80

同被引文献27

引证文献4

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部