期刊文献+

Flow Behavior and Microstructures of Inconel 625 Superalloy at the Elevated Temperature 被引量:2

Flow Behavior and Microstructures of Inconel 625 Superalloy at the Elevated Temperature
原文传递
导出
摘要 The deformation behavior of Inconel 625 superalloy was investigated by means of hot compression tests. The flow stress curves were obtained in the temperature and strain rate ranges of 950-1200 ℃ and 0.01-10 s-1, respectively. Optical microscopy was used to evaluate the microstructural evolution of the alloy under different conditions examined. The results show that the flow stress decreases with decreasing strain rate and increasing temperature, and the activation energy is about 654.502 kJ/mol. Microstructure observations show that with increasing temperature, the sizes and volume fraction of dynamic recrystallization (DRX) grains increase. The strain has no remarkably effect on the sizes of DRX grains, but with increasing strain the volume fraction of DRX grains increases. During hot compression of Inconel 625 superalloy at elevated temperature, the occurrence of DRX was the main softening mechanism. The DRX mechanism of Inconel 625 superalloy can be mainly attributed to the discontinuous dynamic recrystallization (DDRX). The deformation behavior of Inconel 625 superalloy was investigated by means of hot compression tests. The flow stress curves were obtained in the temperature and strain rate ranges of 950-1200 ℃ and 0.01-10 s-1, respectively. Optical microscopy was used to evaluate the microstructural evolution of the alloy under different conditions examined. The results show that the flow stress decreases with decreasing strain rate and increasing temperature, and the activation energy is about 654.502 kJ/mol. Microstructure observations show that with increasing temperature, the sizes and volume fraction of dynamic recrystallization (DRX) grains increase. The strain has no remarkably effect on the sizes of DRX grains, but with increasing strain the volume fraction of DRX grains increases. During hot compression of Inconel 625 superalloy at elevated temperature, the occurrence of DRX was the main softening mechanism. The DRX mechanism of Inconel 625 superalloy can be mainly attributed to the discontinuous dynamic recrystallization (DDRX).
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2011年第S3期95-98,共4页 Rare Metal Materials and Engineering
基金 National Nature Science Foundation of China (50834008)
关键词 INCONEL 625 SUPERALLOY HOT DEFORMATION flow stress dynamic RECRYSTALLIZATION inconel 625 superalloy hot deformation flow stress dynamic recrystallization
  • 相关文献

参考文献7

  • 1Wang Y,Shao W Z,Zhen L et al. Materials Science Engineering A Structural Materials Properties Microstructure and Processing . 2008 被引量:1
  • 2Wang Y,Shao W Z,Zhen L et al. Materials Science Engineering A Structural Materials Properties Microstructure and Processing . 2008 被引量:1
  • 3V.Shankar,K.Bhanu Sankara Rao,S.L.Mannan.Microstructure and mechanical properties of Inconel 625superalloy[].Journal of Nuclear Materials.2001 被引量:1
  • 4Park N K,Kim I S,Na Y S,Yeom J T. Journal of Materials Processing Technology . 2001 被引量:1
  • 5Aghaie-Khafri M,Golarzi N.Forming behavior and work-ability of Hastelloy X super alloy during hot deformation[].Materials Science Engineering A Structural Materials Properties Microstructure and Processing.2008 被引量:1
  • 6Shi H,Mclaren A J. Sellars C M,et al. Materials Science and Technology . 1997 被引量:1
  • 7Humphreys F J,,Hatherly M.Recrystallization and Related Annealing Phenomena [ M][]..2004 被引量:1

同被引文献2

引证文献2

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部