摘要
采用浸泡试验和电化学试验研究了工业纯钛TA1在盐酸溶液中的腐蚀行为。研究表明,随着温度和HCl浓度升高,TA1的自腐蚀电位降低,钝化区电流密度增加,腐蚀速率上升;加入铁离子后,TA1的自腐蚀电位上升,钝化区电流密度减小,斜率减小,腐蚀速率显著降低。
Corrosion behavior of TA1 in HCl solution was studied by immersion and electrochemical tests.The results showed that with increasing the concentration of HCl,the self-corrosion potential decreased,the current density increased,and the corrosion rate increased.With the addition of Fe^3＋,the self-corrosion potential of TA1 rised,the current density in passivation range decreased and the slope of polarization curve decreased,and the corrosion rate decreased obviously.
出处
《腐蚀与防护》
CAS
北大核心
2015年第2期182-186,196,共6页
Corrosion & Protection
基金
国家能源应用技术研究及工程示范项目(NY20110102-1)
国家高技术研究发展(863)计划(2012AA03A501)
国际合作计划(2012DFG51670)
关键词
工业纯钛
盐酸
氧化性离子
点蚀
commercial pure titanium
hydrochloric acid
oxidizing species
pitting corrosion
