摘要
在城市夜景照明大量建设的阶段,经常出现实际效果与设计效果不符的情况。本文研究导致设计无法实现的原因,并针对原因提出改进点。通过分析原因,提出解决行业需求的设计方法。在创意设计之后的设计步骤如下:1)确定建筑各部位的量化指标;2)灯参数增加对效果目标的要求;3)通过灯具实验,将灯具实验结果与预期效果进行比较;4)根据实验结果调整灯参数,并调整对建筑各部位的预期值,确保有两至三款灯具可以达到目标。通过国家博物馆的案例,说明效果量化设计方法的应用,可有效提高实施效果与设计预期的契合度。并提出方法中的效果验证环节,也将成为为设计行业服务的基础。
In the phase of large-scale construction of urban nightscape lighting,the implementation effect and the design effect were always not in conformity.This paper studied the reasons and gave the improvement suggestions.Through analyzing the reasons,the design method to meet the design requirements was put forward.The design steps after the creative design were as follows：1） Determine the quantitative index for each part of the building.2） Add the effect target demand for the lighting parameters.3） Compare the test result with the expected effect after the luminaire tests.4） Adjust the lighting parameters according to the test result,adjust the expected value for each part of the building,and ensure that 2 ～ 3 luminaires could reach the target.Finally,the advantages of this method would be illustrated by National Museum project,and effect verification would be brought up.Effect verification would be the new development direction of industry service.
出处
《照明工程学报》
2015年第6期60-62,共3页
China Illuminating Engineering Journal
关键词
建筑外立面照明
效果量化
设计方法
building facade lighting
effect quantification
design method
