摘要
目的研究骶骨第1椎弓根倾斜角与骶骨耳状面解剖形态的相关性,为骶髂关节骨折脱位经皮骶髂螺钉固定提供解剖学依据。方法 42块干燥成人骶骨,在大体标本和X线影像上分别测量耳状面和第1椎弓根的相关参数,并分析他们之间的相关性。结果耳状面上、下半长轴长比值R1为0.86±0.15,根据其大小可将耳状面分为L型(R1>1)和f型(R1<1)。第1椎弓根倾斜角θ为(25.72±6.69)°,R1与θ呈负相关。结论当第1椎弓根倾斜角较小时,其耳状面多为L型,建议手术螺钉的进钉点偏下、小角度向内上;当第1椎弓根倾斜角较大时,其耳状面多为f型,建议手术螺钉的进针点偏上、大角度向内上。
Objective In order to provide anatomic basis for percutaneous fixation using sacroiliac screw by analyzing the correlation between the inclination of S1 pedicles and morphology of auricular surface of sacrum was investigated. Methods The relevant parameters of S1 pedicles and auricular surface were measured in 42 dry adult sacra respectively, then the correlation of the parameters was analyzed statistically. Results The ratio （R1） of long axis of the upper part and the lower part was 0.86 ± 0.15. According to the value of R1, the auricular surface was classified into two types, type L（R1〉1）and f（R1〈1）. The inclination of S1 pedicles （θ） was （25.72 ± 6.69）° , and the ratio R1 was correlated negatively with inclination θ. Conclusion When the inclination of S1 pedicles is small, the auricular surface is type L, suggesting optimal angle of screw of S1 pedicle is smaller and the optimal point of surgical screws should be lower. When the inclination of S1 pedicles is larger, the auricular surface is type f, suggesting optimal angle of screw of S1 pedicle is larger and the optimal point of surgical screws should be higher.
出处
《中国临床解剖学杂志》
CSCD
北大核心
2015年第6期637-640,共4页
Chinese Journal of Clinical Anatomy
基金
第二军医大学创新能力培养计划(MS2013032)
关键词
骶骨耳状面
第1椎弓根
相关性
骶髂关节固定
Sacral auricular surface
S1 pedicle
Correlation
Fixation of sacroiliac joint
