期刊文献+

双层交错布置多孔喷嘴燃烧排放性能试验研究 被引量:2

Experimental Research of Combustion and Emission of Double-staggered Arranged Porous Nozzle
下载PDF
导出
摘要 在某单缸柴油机上搭建高压共轨系统整机试验台架,研究双层交错布置多孔喷嘴结构对柴油机燃烧和排放性能的影响规律。试验结果表明:相同几何流通面积的双层交错布置多孔喷嘴相比于传统单层喷嘴经济性提高,NOx排放和碳烟排放改善;孔径较小的双层交错布置多孔喷嘴方案燃油消耗率较高,NOx排放较低,碳烟排放较高;下层喷孔喷射夹角小的双层交错布置多孔喷嘴方案缸内平均压力和温度高,油耗和排温降低,NOx排放较多,碳烟排放较少。 The influences of structural parameters of double-staggered porous nozzle on diesel combustion and emission were studied on a single cylinder common rail diesel engine.The test results show that the double-staggered porous nozzle has higher economy as well as lower NOx and soot emissions as compared to the traditional nozzle with same geometry flow area.The double-staggered porous nozzle with smaller nozzle holes has higher fuel consumption rate,as well as lower NOxemission and higher soot emission.While the double-staggered porous nozzle with smaller spray angle for lower nozzle holes has lower fuel consumption rate,as well as higher NOxemission and lower soot emission.
出处 《内燃机工程》 EI CAS CSCD 北大核心 2015年第4期81-84,共4页 Chinese Internal Combustion Engine Engineering
基金 国防"十二五"预研项目(2010701010101)
关键词 内燃机 双层交错布置多孔喷嘴 下层喷孔 喷孔直径 油耗率 IC engine double-staggered porous nozzle the lower nozzle hole nozzle hole diameter fuel consumption rate
  • 相关文献

参考文献7

  • 1蒋德明著..内燃机燃烧与排放学[M].西安:西安交通大学出版社,2001:690.
  • 2苏万华,赵华,王建昕著..均质压燃低温燃烧发动机理论与技术[M].北京:科学出版社,2010:215.
  • 3Inderpal S, Imrun Z, Minq-Chia D, et al. Effect of nozzle hole geometry on a HSDI diesel engine-out emissions [C]//SAE 2003-01-0704,2003. 被引量:1
  • 4Benajes J, Pastor J V, Payri R, et ai. Analysis of the influence of diesel nozzle geometry in the injection rate eharacteristic[J].Journal of Fluids Engineering, 2004,126(1) : 63-71. 被引量:1
  • 5Kilic A. Influence of nozzle parameters on single jet flow quantities of multi-hole diesel injection nozzles[C]//SAE 2006- 01-1983,2006. 被引量:1
  • 6黄康,欧阳光耀,安士杰,常汉宝.双层交错布置多孔喷嘴设计与仿真研究[J].上海交通大学学报,2013,47(3):434-437. 被引量:4
  • 7黄康,欧阳光耀,安士杰,刘振明,常汉宝.双层交错布置多孔喷嘴预混合燃烧排放特性研究[J].内燃机工程,2013,34(S1):42-46. 被引量:3

二级参考文献7

  • 1Dahlander P, Lindgren R. Multi hole injectors for DI- SI engines: Nozzle hole nonfiguration influence on spray formation[C]//SAE 2008-01-0136, 2008. 被引量:1
  • 2Benajes J, Payri R. Investigation of the influence of injection rate shaping on the spray characteristics in a diesel common rail system equipped with a piston am- plifier[J]. Transactions of the ASME, 2005, 127 ( 1 ) : 1102-1111. 被引量:1
  • 3Benajes J, Pastor J V,Payri R, et al. Analysis of the influence of diesel nozzle geometry in the injection rate characteristic[J]. Journal of Fluids Engineering, 2004, 126(1) :63-71. 被引量:1
  • 4Kilic A. Influence of nozzle parameters on single jet flow quantities of multi-hole diesel injection nozzles[C] //SAE 2006-01-1983, 2006. 被引量:1
  • 5Inderpal S, Lurun Z, Minq-Chia D, et al. Effect of nozzle hole geometry on a hsdi diesel engine out emis- sions[C]//SAE 2003-01-0704, 2003. 被引量:1
  • 6Graz. AVI. Fire Reference Manual, Version8. 5 [ EB/ OL]. (2006-12)[2011- 09-20]. http://www, avl. com. 被引量:1
  • 7邵利民,常汉宝,周加东,金华军,施文杰.喷嘴结构对多孔喷油器喷射特性影响的研究[J].内燃机工程,2010,31(6):43-48. 被引量:15

共引文献5

同被引文献19

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部