期刊文献+

湍流抑制器对中间包钢液流动的影响 被引量:5

Effect of turbulence inhibitor on the flow behavior of molten steel in slab tundish
下载PDF
导出
摘要 采用水模拟试验研究湍流抑制器对中间包钢液流动特性的影响。结果表明,拉速变化时单层湍流抑制器对钢液流动影响程度较小,双层湍流抑制器能延长包内钢液平均停留时间;液位变化时双层湍流抑制器对钢液流动影响程度较小,相同液位下双层湍流抑制器使钢液在中间包内平均停留时间较之于单层湍抑器相应值至少增加20s;3种湍流抑制器对中间包流场的改善程度从大到小排序为:双层湍流抑制器,八角形湍流抑制器,单层湍流抑制器。 Hydraulic simulation experiment was conducted to study the effect of turbulence inhibitor on the flow behavior of molten steel in the slab tundish .The results show that when the casting speed changes ,turbulence inhibitor with single layer structure has less influence on the flow of molten steel and turbulence inhibitor with double layer structure can extend the average residence time of molten steel in the tundish .When the level of molten steel changes ,turbulence inhibitor with double layer structure has less influence on the flow of molten steel .Compared with the single layer structure in‐hibitor ,the average residence time of molten steel in the double layer structure inhibitor under the same liquid level increases by at least 20 seconds .The improvement of the flow field in the slab tundish is the greatest with double layer structure ,followed by octagonal structure and single layer structure .
出处 《武汉科技大学学报》 CAS 北大核心 2015年第3期161-164,共4页 Journal of Wuhan University of Science and Technology
基金 国家自然科学基金青年科学基金资助项目(51404022)
关键词 中间包 钢液流动 湍流抑制器 拉速 液位 tundish molten steel flow turbulence inhibitor casting speed level of molten steel
  • 相关文献

参考文献8

二级参考文献58

  • 1郑淑国,朱苗勇,姜桂连,宋嘉鹏.四流矩形中间包冲击碗应用水模实验研究[J].钢铁,2004,39(5):23-25. 被引量:14
  • 2王立涛,张乔英,李正邦.中间包内流体流动及夹杂物去除的研究[J].炼钢,2005,21(2):26-29. 被引量:15
  • 3Tanaka H, Nishihara R, Kitagawa I, et al. Quantitative Analysis of Contamination of Molten Steel in Tundish [J]. ISIJ International, 1993, 33(12) : 1238. 被引量:1
  • 4Tacke K H, Ludwig J C. Steel Flow and Inclusion Separation in Continuous Casting Tundishes [J]. Steel Research, 1987, 58(6) : 262. 被引量:1
  • 5Kaufmann H B, Niedermayr A, Sattler H, et al. Separation of Nonmetallic Particles in Tundishes [J]. Steel Research, 1993,64(4): 203. 被引量:1
  • 6Tozawa K, Kato Y, Nakanishi T. Number of Solid Particles Per Inclusion Cluster [J]. CAMP-ISIJ, 1997, 10: 105. 被引量:1
  • 7Sinha A K, Sahai Y. Mathematical Modeling of Inclusion Transport and Removal in Continuous Casting Tundishes [J]. ISIJ International, 1993, 33(5): 556. 被引量:1
  • 8Hlinka J W. Water Model for the Quantitative Simulation of the Heat and Fluid Flow in Liquid-Steel Refractory Systems [C] //Mathematical Process Models in Iron-Steel Making. London: The Metals Society, 1975: 157. 被引量:1
  • 9Chakraborty S, Sahai Y. Mathematical Modelling of Transport Phenomena in Continuous Casting Tundishes. Part 2. Transient Effects Owing to Varying Ladle Stream Temperature [J]. Ironmaking and Steelmaking, 1992, 19(6): 479. 被引量:1
  • 10Chakraborty S, Sahai Y. Mathematical Modelling of Transport Phenomena in Continuous Casting Tundishes. Part 1. Transient Effects During Ladle Transfer Operations [J]. Ironrnaking and Steelmaking, 1992, 19(6): 488. 被引量:1

共引文献44

同被引文献67

引证文献5

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部