摘要
针对现有小型风力发电机效率远低于理论值问题,对100 W水平轴风力机叶片进行仿生改进。采用Spalart-Allmaras模型分析不同攻角下海鸥翼型与标准翼型的气动特性;以标准100 W水平轴风力机叶片为原型,结合海鸥翼型、标准弦长和计算得出的安装角,设计得到仿海鸥翼型叶片;利用SST k-ω模型进行仿海鸥翼型叶片与标准叶片气动特性数值模拟;搭建室内风力机效率测试平台,进行仿海鸥翼型风力机与标准风力机效率对比试验。结果表明:海鸥翼型气动性能优良,最大升力系数是标准翼型的2.19倍,最大升阻比是标准翼型的1.34倍;仿海鸥翼型叶片与标准叶片相比,输出功率提高25.77%。该研究可为小型风力发电机的改进设计提供参考。
Power of the existing small-sized wind turbine blades is much less than the theoretical value. This study improved 100 W wind turbine blades to increase the power of wind turbine. First of all, Spalart-Allmaras model which was suitable for airfoil stalling characteristics research was used to analyze the aerodynamic characteristics of seagull airfoil and standard airfoil with different angles of attack （AOA）. Seagull airfoil and standard airfoil were got from seagull wing and standard blade by portable three-dimension scanner, Imageware software and Geomagic Studio software through standard blade scan, seagull wing scan, point cloud processing, reverse engineering modeling and cross section capture. Lift coefficients and lift-drag ratios of seagull airfoil and standard airfoil were calculated by Fluent software. Secondly, bionic blade was designed based on standard 100 W blades and Glauert theory. Thirdly, numerical simulations of bionic blade and standard blade were performed by using SST（shear stress transport） k-ω model which was suitable for blade performance research to analyze the aerodynamic characteristics of bionic blade and standard blade. Last of all, efficiencies of bionic wind turbine and standard wind turbine were measured by using self-designed test platform to compare the effects of these 2 kinds of wind turbines. Lift coefficient of seagull airfoil was higher than that of standard airfoil with different AOA of from 0 to 20°. The maximum lift coefficient of seagull airfoil was 2.19 times that of standard airfoil with the AOA of 8°. Lift-drag ratio of seagull airfoil was also higher than that of standard airfoil with different AOA of from 0 to 20°. The maximum lift-drag ratio of seagull airfoil with the AOA of 3° was 1.34 times that of standard airfoil with the AOA of 5°. Static pressure color map showed that surface pressure difference of seagull airfoil was larger than that of standard airfoil with the same AOA. With the AOA of 15°, upper surface of standard airfoil was separated w
出处
《农业工程学报》
EI
CAS
CSCD
北大核心
2015年第10期72-77,共6页
Transactions of the Chinese Society of Agricultural Engineering
基金
吉林省科技发展计划项目(20140204082GX)
关键词
风力机
翼型
数值分析
风能利用
海鸥翼型
仿生
wind turbines
airfoils
numerical analysis
wind energy utilization
seagull airfoil
bionic
