摘要
Through the thermo-mechanical control process （TMCP）, a high Nb low Mo fire resistant steel with the yield strength （YS） of 521 MPa at room temperature （RT） and 360 MPa at elevated temperature （ET） of 600 ℃ was developed based on MX （M=Nb, V, Mo; X=C,N） precipitation strengthening. A series of tensile and con- stant load tests were conducted to study the mechanical properties at ET. The dynamic continuous cooling transfor- mation （CCT） as well as precipitation behavior of microalloy carbonitride was investigated by means of thermal sim- ulator and electron microscopy approaches. Results showed that the failure temperature of tested steel was deter- mined as 653 ℃, and the granular bainite was obtained when the cooling rate was higher than 10 ℃/s. In the rolled state, a certain amount of M/A islands was observed. During heating from RT to ET, M/A islands disappeared, and cementites and high dense compound precipitates （Nb, Mo, V）C with size of less than 10 nm precipitated in ferrite at ET （600 ℃）, which resulted in precipitation strengthening at ET.
Through the thermo-mechanical control process （TMCP）, a high Nb low Mo fire resistant steel with the yield strength （YS） of 521 MPa at room temperature （RT） and 360 MPa at elevated temperature （ET） of 600 ℃ was developed based on MX （M=Nb, V, Mo; X=C,N） precipitation strengthening. A series of tensile and con- stant load tests were conducted to study the mechanical properties at ET. The dynamic continuous cooling transfor- mation （CCT） as well as precipitation behavior of microalloy carbonitride was investigated by means of thermal sim- ulator and electron microscopy approaches. Results showed that the failure temperature of tested steel was deter- mined as 653 ℃, and the granular bainite was obtained when the cooling rate was higher than 10 ℃/s. In the rolled state, a certain amount of M/A islands was observed. During heating from RT to ET, M/A islands disappeared, and cementites and high dense compound precipitates （Nb, Mo, V）C with size of less than 10 nm precipitated in ferrite at ET （600 ℃）, which resulted in precipitation strengthening at ET.
基金
Item Sponsored by National Basic Research Program of China(2010CB630805)
