摘要
对超高性能混凝土UHPC(Ultra-High Performance Concrete)剪力墙在单向水平荷载作用下的受力过程进行了非线性有限元分析.重点分析了轴压比、剪跨比、暗柱纵筋配筋率、暗柱箍筋配箍率、分布钢筋配筋率等因素对UHPC剪力墙抗剪承载力的影响.结果表明:UHPC混凝土剪力墙抗剪承载力高,延性较好,值得在工程领域应用.随着轴压比的增大,承载力先增大后减小,延性大幅下降,应该严格控制轴压比;随着剪跨比增大,破坏形态发生变化,承载力减小;随着暗柱纵筋配筋率的增大,承载力增大;暗柱箍筋体积配箍率及分布钢筋的增大对承载力的影响不很明显.
This paper uses nonlinear finite element analysis upon the basic behavior of Ultra -high performance concrete shear wall subjected to monodirectional lateral load, and studies the effect of axial load ratio, shear span ratio, the ratio of hidden column longitudinal, the volumetric ratio of hidden column and the ratio of web reinforcement on the shear bearing capacity. The research shows that： the bearing capacity of UHPC shear wall is high; the displacement ductility of UHPC shear wall is well. With the increased of axial load ratio, the bearing capacity is first increased and then decreased, the ductility drop significantly, so axial load ratio should be strictly controlled; With the shear span ratio increased, the destruction of morphological change and the bearing capacity increase; With the ratio of hidden column longitudinal increasing, the bearing capacity increase; the volumetric ratio of hidden column, the ratio of web horizontal reinforcement and the ratio of web vertical reinforcement effect on bearing capacity are not very obvious.
出处
《湖南理工学院学报（自然科学版）》
CAS
2015年第1期55-58,76,共5页
Journal of Hunan Institute of Science and Technology(Natural Sciences)
基金
国家级大学生创新创业训练计划项目(201410543005)
湖南省大学生研究性学习和创新性实验计划项目(湘教通[2014]248号)
关键词
超高性能混凝土
剪力墙
非线性有限元
抗剪承载力
ultra-high performance concrete
shear wall
nonlinear FEM
shear bearing capacity
